manpagez: man pages & more
html files: pygtk
Home | html | info | man
): gtk.ActionGroup(name)
def get_name()
def get_sensitive()
def set_sensitive(sensitive)
def get_visible()
def set_visible(visible)
def get_action(action_name)
def list_actions()
def add_action(action)
def add_action_with_accel(action, accelerator)
def remove_action(action)
def add_actions(entries, user_data=None)
def add_toggle_actions(entries, user_data=None)
def add_radio_actions(entries, value=0, on_change=None, user_data=None)
def set_translation_domain(domain)
def translate_string(string)

Ancestry

+-- gobject.GObject
  +-- gtk.ActionGroup

Implemented Interfaces

gtk.ActionGroup implements gtk.Buildable

gtk.ActionGroup Properties

"name"Read-WriteA name for the action group.
"sensitive"Read-WriteIf True, the action group is enabled.
"visible"Read-WriteIf True, the action group is visible.

gtk.ActionGroup Signal Prototypes

gobject.GObject Signal Prototypes

"connect-proxy"

def callback(actiongroup, action, proxy, user_param1, ...)

"disconnect-proxy"

def callback(actiongroup, action, proxy, user_param1, ...)

"post-activate"

def callback(actiongroup, action, user_param1, ...)

"pre-activate"

def callback(actiongroup, action, user_param1, ...)

Description

Note

This object is available in PyGTK 2.4 and above.

gtk.Action objects are organized into gtk.ActionGroup objects. An action group is basically a map from names to gtk.Action objects.

All actions that would make sense to use in a particular context should be in a single action group. Multiple action groups may be used for a particular user interface. In fact, it is expected that most nontrivial applications will make use of multiple groups. For example, in an application that can edit multiple documents, there could be one group holding global actions (e.g. quit, about, new), and one group per document holding actions that act on that document (e.g. save, cut/copy/paste, etc). Each window's menus would be constructed from a combination of the two action groups.

Accelerators are handled by the GTK+ accelerator map. All actions are assigned an accelerator path (which normally has the form "<Actions>/group-name/action-name") and a shortcut is associated with this accelerator path. All menuitems and toolitems take on this accelerator path. The GTK+ accelerator map code makes sure that the correct shortcut is displayed next to the menu item.

Constructor

    gtk.ActionGroup(name)

name :

the name of the action group.

Returns :

the new gtk.ActionGroup

Note

This constructor is available in PyGTK 2.4 and above.

Creates a new gtk.ActionGroup object with the name specified by name. The name of the action group is used when associating keybindings with the actions.

Methods

gtk.ActionGroup.get_name

    def get_name()

Returns :

the name of the action group.

Note

This method is available in PyGTK 2.4 and above.

The get_name() method returns the value of the "name" property that contains the name of the action group.

gtk.ActionGroup.get_sensitive

    def get_sensitive()

Returns :

True if the group is sensitive.

Note

This method is available in PyGTK 2.4 and above.

The get_sensitive() method returns the value of the "sensitive" property. If "sensitive" is True the group is enabled. The constituent actions can only be logically sensitive (see the gtk.Action.is_sensitive() method) if they are sensitive (see the gtk.Action.get_sensitive() method) and their group is sensitive.

gtk.ActionGroup.set_sensitive

    def set_sensitive(sensitive)

sensitive :

if True, the group is enabled

Note

This method is available in PyGTK 2.4 and above.

The set_sensitive() method sets the "sensitive" property to the value of sensitive. If sensitive is True, the gtk.ActionGroup is enabled.

gtk.ActionGroup.get_visible

    def get_visible()

Returns :

True if the group is visible.

Note

This method is available in PyGTK 2.4 and above.

The get_visible() method returns the value of the "visible" property. If "visible" is True, the group is visible. The constituent actions can only be logically visible (see the gtk.Action.is_visible() method) if they are visible (see the gtk.Action.get_visible() method) and their group is visible.

gtk.ActionGroup.set_visible

    def set_visible(visible)

visible :

if True, the group will be visible

Note

This method is available in PyGTK 2.4 and above.

The set_visible() method sets the "visible" property to the value of visible. If visible is True the gtk.ActionGroup will be visible.

gtk.ActionGroup.get_action

    def get_action(action_name)

action_name :

the name of the action

Returns :

the action, or None if no action with that name exists.

Note

This method is available in PyGTK 2.4 and above.

The get_action() method retrieves the action in the action group with the name specified by action_name.

gtk.ActionGroup.list_actions

    def list_actions()

Returns :

a list of the action objects in the action group

Note

This method is available in PyGTK 2.4 and above.

The list_action() method returns a list containing the gtk.Action objects in the action group.

gtk.ActionGroup.add_action

    def add_action(action)

action :

an action

Note

This method is available in PyGTK 2.4 and above.

The add_action() method adds the gtk.Action specified by action to the action group.

gtk.ActionGroup.add_action_with_accel

    def add_action_with_accel(action, accelerator)

action :

the action to add

accelerator :

the accelerator for the action, in the format understood by the gtk.accelerator_parse() function, or None to use the stock accelerator

Note

This method is available in PyGTK 2.4 and above.

The add_action_with_accel() method adds a gtk.Action specified by action to the action group and sets up the accelerator specified by accelerator.

If accelerator is None, this method attempts to use the accelerator associated with the "stock_id" property of the gtk.Action.

Accel paths are set to <Actions>/group-name/action-name.

gtk.ActionGroup.remove_action

    def remove_action(action)

action :

a gtk.Action

Note

This method is available in PyGTK 2.4 and above.

The remove_action() method removes the gtk.Action specified by action from the action group.

gtk.ActionGroup.add_actions

    def add_actions(entries, user_data=None)

entries :

a list or tuple of action descriptions

user_data :

data to pass to the action callbacks

Note

This method is available in PyGTK 2.4 and above.

The add_actions() method is a convenience method that creates a number of gtk.Action objects based on the information in the list of action entry tuples contained in entries and adds them to the action group. The entry tuples can vary in size from one to six items with the following information:

  • The name of the action. Must be specified.
  • The stock id for the action. Optional with a default value of None if a label is specified.
  • The label for the action. This field should typically be marked for translation, see the set_translation_domain() method. Optional with a default value of None if a stock id is specified.
  • The accelerator for the action, in the format understood by the gtk.accelerator_parse() function. Optional with a default value of None.
  • The tooltip for the action. This field should typically be marked for translation, see the set_translation_domain() method. Optional with a default value of None.
  • The callback function invoked when the action is activated. Optional with a default value of None.

The "activate" signals of the actions are connected to the callbacks and their accel paths are set to <Actions>/group-name/action-name.

gtk.ActionGroup.add_toggle_actions

    def add_toggle_actions(entries, user_data=None)

entries :

a list or tuple of toggle action entry tuples

user_data :

data to pass to the action callbacks

Note

This method is available in PyGTK 2.4 and above.

The add_toggle_actions() method is a convenience method that creates a number of gtk.ToggleAction objects based on the information in the list of action entry tuples contained in entries and adds them to the action group. The toggle action entry tuples can vary in size from one to seven items with the following information:

  • The name of the action. Must be specified.
  • The stock id for the action. Optional with a default value of None if a label is specified.
  • The label for the action. This field should typically be marked for translation, see the set_translation_domain() method. Optional with a default value of None if a stock id is specified.
  • The accelerator for the action, in the format understood by the gtk.accelerator_parse() function. Optional with a default value of None.
  • The tooltip for the action. This field should typically be marked for translation, see the set_translation_domain() method. Optional with a default value of None.
  • The callback function invoked when the action is activated. Optional with a default value of None.
  • A flag indicating whether the toggle action is active. Optional with a default value of False.

The "activate" signals of the actions are connected to the callbacks and their accel paths are set to <Actions>/group-name/action-name.

gtk.ActionGroup.add_radio_actions

    def add_radio_actions(entries, value=0, on_change=None, user_data=None)

entries :

a list or tuple of radio action entry tuples

value :

the value of the radio action to set active

on_change :

a callback to connect to the "changed" signal of the first radio action

user_data :

data to pass to the on_change callback

Note

This method is available in PyGTK 2.4 and above.

The add_radio_actions() method is a convenience method that creates a number of gtk.RadioAction objects based on the information in the list of action entry tuples contained in entries and adds them to the action group. The entry tuples can vary in size from one to six items with the following information:

  • The name of the action. Must be specified.
  • The stock id for the action. Optional with a default value of None if a label is specified.
  • The label for the action. This field should typically be marked for translation, see the set_translation_domain() method. Optional with a default value of None if a stock id is specified.
  • The accelerator for the action, in the format understood by the gtk.accelerator_parse() function. Optional with a default value of None.
  • The tooltip for the action. This field should typically be marked for translation, see the set_translation_domain() method. Optional with a default value of None.
  • The value to set on the radio action. Optional with a default value of 0. Should be specified in applications.

The value parameter specifies the radio action that should be set active. The "changed" signal of the first radio action is connected to the on_change callback (if specified and not None) and the accel paths of the actions are set to <Actions>/group-name/action-name.

gtk.ActionGroup.set_translation_domain

    def set_translation_domain(domain)

domain :

the translation domain to use for dgettext() calls

Note

This method is available in PyGTK 2.4 and above.

The set_translation_domain() method sets the translation domain to the string specified by domain and uses dgettext() for translating the label and tooltip strings of the actions added by the add_actions(), add_toggle_actions() and add_radio_actions() methods.

gtk.ActionGroup.translate_string

    def translate_string(string)

string :

the string to be translated

Returns :

the translation of string

Note

This method is available in PyGTK 2.6 and above.

The translate_string() method translates the string specified by string using the specified translate_func(). This is mainly intended for language bindings.

Signals

The "connect-proxy" gtk.ActionGroup Signal

    def callback(actiongroup, action, proxy, user_param1, ...)

actiongroup :

the actiongroup that received the signal

action :

the action that is associated with proxy

proxy :

the proxy widget associated with action

user_param1 :

the first user parameter (if any) specified with the connect() method

... :

additional user parameters (if any)

Note

This signal is available in PyGTK 2.4 and above.

The "connect-proxy" signal is emitted when the widget specified by proxy is connected to the gtk.Action specified by action.

The "disconnect-proxy" gtk.ActionGroup Signal

    def callback(actiongroup, action, proxy, user_param1, ...)

actiongroup :

the actiongroup that received the signal

action :

the action that is associated with proxy

proxy :

the proxy widget associated with action

user_param1 :

the first user parameter (if any) specified with the connect() method

... :

additional user parameters (if any)

Note

This signal is available in PyGTK 2.4 and above.

The "disconnect-proxy" signal is emitted when the widget specified by proxy is disconnected from the gtk.Action specified by action.

The "post-activate" gtk.ActionGroup Signal

    def callback(actiongroup, action, user_param1, ...)

actiongroup :

the actiongroup that received the signal

action :

the action that is being activated

user_param1 :

the first user parameter (if any) specified with the connect() method

... :

additional user parameters (if any)

Note

This signal is available in PyGTK 2.4 and above.

The "post-activate" signal is emitted after the gtk.Action specified by action has been activated.

The "pre-activate" gtk.ActionGroup Signal

    def callback(actiongroup, action, user_param1, ...)

actiongroup :

the actiongroup that received the signal

action :

the action that is being activated

user_param1 :

the first user parameter (if any) specified with the connect() method

... :

additional user parameters (if any)

Note

This signal is available in PyGTK 2.4 and above.

The "pre-activate" signal is emitted before the gtk.Action specified by action is activated.

© manpagez.com 2000-2024
Individual documents may contain additional copyright information.