manpagez: man pages & more
html files: gst-plugins-bad-plugins-1.0
Home | html | info | man

webrtcdsp

webrtcdsp — Audio Filter using WebRTC Audio Processing library

Properties

gboolean echo-cancel Read / Write / Construct
gboolean experimental-agc Read / Write / Construct
gboolean extended-filter Read / Write / Construct
gboolean gain-control Read / Write / Construct
gboolean high-pass-filter Read / Write / Construct
gboolean noise-suppression Read / Write / Construct
gchar * probe Read / Write / Construct
GstWebrtcEchoSuppressionLevel echo-suppression-level Read / Write / Construct
GstWebrtcNoiseSuppressionLevel noise-suppression-level Read / Write / Construct
gboolean delay-agnostic Read / Write / Construct
gint compression-gain-db Read / Write / Construct
GstWebrtcGainControlMode gain-control-mode Read / Write / Construct
gboolean limiter Read / Write / Construct
gint startup-min-volume Read / Write / Construct
gint target-level-dbfs Read / Write / Construct
gboolean voice-detection Read / Write / Construct
gint voice-detection-frame-size-ms Read / Write / Construct
GstWebrtcVoiceDetectionLikelihood voice-detection-likelihood Read / Write / Construct

Types and Values

Description

A voice enhancement filter based on WebRTC Audio Processing library. This library provides a whide variety of enhancement algorithms. This element tries to enable as much as possible. The currently enabled enhancements are High Pass Filter, Echo Canceller, Noise Suppression, Automatic Gain Control, and some extended filters.

While webrtcdsp element can be used alone, there is an exception for the echo canceller. The audio canceller need to be aware of the far end streams that are played to loud speakers. For this, you must place a webrtcechoprobe element at that far end. Note that the sample rate must match between webrtcdsp and the webrtechoprobe. Though, the number of channels can differ. The probe is found by the DSP element using it's object name. By default, webrtcdsp looks for webrtcechoprobe0, which means it just work if you have a single probe and DSP.

The probe can only be used within the same top level GstPipeline. Additonally, to simplify the code, the probe element must be created before the DSP sink pad is activated. It does not need to be in any particular state and does not even need to be added to the pipeline yet.

Example launch line

As a conveniance, the echo canceller can be tested using an echo loop. In this configuration, one would expect a single echo to be heard.

1
gst-launch-1.0 pulsesrc ! webrtcdsp ! webrtcechoprobe ! pulsesink

In real environment, you'll place the probe before the playback, but only process the far end streams. The DSP should be placed as close as possible to the audio capture. The following pipeline is astracted and does not represent a real pipeline.

1
2
gst-launch-1.0 far-end-src ! audio/x-raw,rate=48000 ! webrtcechoprobe ! pulsesink \
               pulsesrc ! audio/x-raw,rate=48000 ! webrtcdsp ! far-end-sink

Synopsis

Element Information

plugin

webrtcdsp

author

Nicolas Dufresne <nicolas.dufresne@collabora.com>

class

Generic/Audio

Element Pads

name

sink

direction

sink

presence

always

details

audio/x-raw, format=(string)S16LE, layout=(string)interleaved, rate=(int){ 48000, 32000, 16000, 8000 }, channels=(int)[ 1, 2147483647 ]

name

src

direction

source

presence

always

details

audio/x-raw, format=(string)S16LE, layout=(string)interleaved, rate=(int){ 48000, 32000, 16000, 8000 }, channels=(int)[ 1, 2147483647 ]

Functions

Types and Values

GstWebrtcDsp

typedef struct _GstWebrtcDsp GstWebrtcDsp;

Property Details

The “echo-cancel” property

  “echo-cancel”              gboolean

Enable or disable echo canceller.

Flags: Read / Write / Construct

Default value: TRUE


The “experimental-agc” property

  “experimental-agc”         gboolean

Enable or disable experimental automatic gain control.

Flags: Read / Write / Construct

Default value: FALSE


The “extended-filter” property

  “extended-filter”          gboolean

Enable or disable the extended filter.

Flags: Read / Write / Construct

Default value: TRUE


The “gain-control” property

  “gain-control”             gboolean

Enable or disable automatic digital gain control.

Flags: Read / Write / Construct

Default value: TRUE


The “high-pass-filter” property

  “high-pass-filter”         gboolean

Enable or disable high pass filtering.

Flags: Read / Write / Construct

Default value: TRUE


The “noise-suppression” property

  “noise-suppression”        gboolean

Enable or disable noise suppression.

Flags: Read / Write / Construct

Default value: TRUE


The “probe” property

  “probe”                    gchar *

The name of the webrtcechoprobe element that record the audio being played through loud speakers. Must be set before PAUSED state.

Flags: Read / Write / Construct

Default value: "webrtcechoprobe0"


The “echo-suppression-level” property

  “echo-suppression-level”   GstWebrtcEchoSuppressionLevel

Controls the aggressiveness of the suppressor. A higher level trades off double-talk performance for increased echo suppression.

Flags: Read / Write / Construct

Default value: Moderate Suppression


The “noise-suppression-level” property

  “noise-suppression-level”  GstWebrtcNoiseSuppressionLevel

Controls the aggressiveness of the suppression. Increasing the level will reduce the noise level at the expense of a higher speech distortion.

Flags: Read / Write / Construct

Default value: Moderate Suppression


The “delay-agnostic” property

  “delay-agnostic”           gboolean

Enable or disable the delay agnostic mode.

Flags: Read / Write / Construct

Default value: FALSE


The “compression-gain-db” property

  “compression-gain-db”      gint

Sets the maximum |gain| the digital compression stage may apply, in dB.

Flags: Read / Write / Construct

Allowed values: [0,90]

Default value: 9


The “gain-control-mode” property

  “gain-control-mode”        GstWebrtcGainControlMode

Controls the mode of the compression stage.

Flags: Read / Write / Construct

Default value: Adaptive Digital


The “limiter” property

  “limiter”                  gboolean

When enabled, the compression stage will hard limit the signal to the target level. Otherwise, the signal will be compressed but not limited above the target level.

Flags: Read / Write / Construct

Default value: TRUE


The “startup-min-volume” property

  “startup-min-volume”       gint

At startup the experimental AGC moves the microphone volume up to |startup_min_volume| if the current microphone volume is set too low. No effect if experimental-agc isn't enabled.

Flags: Read / Write / Construct

Allowed values: [12,255]

Default value: 12


The “target-level-dbfs” property

  “target-level-dbfs”        gint

Sets the target peak |level| (or envelope) of the gain control in dBFS (decibels from digital full-scale).

Flags: Read / Write / Construct

Allowed values: [0,31]

Default value: 3


The “voice-detection” property

  “voice-detection”          gboolean

Enable or disable the voice activity detector.

Flags: Read / Write / Construct

Default value: FALSE


The “voice-detection-frame-size-ms” property

  “voice-detection-frame-size-ms” gint

Sets the |size| of the frames in ms on which the VAD will operate. Larger frames will improve detection accuracy, but reduce the frequency of updates.

Flags: Read / Write / Construct

Allowed values: [10,30]

Default value: 10


The “voice-detection-likelihood” property

  “voice-detection-likelihood” GstWebrtcVoiceDetectionLikelihood

Specifies the likelihood that a frame will be declared to contain voice.

Flags: Read / Write / Construct

Default value: Low Likelihood

© manpagez.com 2000-2024
Individual documents may contain additional copyright information.