gst_codec_utils_aac_get_sample_rate_from_index ()

guint
gst_codec_utils_aac_get_sample_rate_from_index
                               (guint sr_idx);

Translates the sample rate index found in AAC headers to the actual sample rate.

gst_codec_utils_aac_get_index_from_sample_rate ()

gint
gst_codec_utils_aac_get_index_from_sample_rate
                               (guint rate);

Translates the sample rate to the index corresponding to it in AAC spec.

gst_codec_utils_aac_get_profile ()

const gchar *
gst_codec_utils_aac_get_profile (const guint8 *audio_config,
                                 guint len);

Returns the profile of the given AAC stream as a string. The profile is determined using the AudioObjectType field which is in the first 5 bits of audio_config .

gst_codec_utils_aac_get_level ()

const gchar *
gst_codec_utils_aac_get_level (const guint8 *audio_config,
                               guint len);

Determines the level of a stream as defined in ISO/IEC 14496-3. For AAC LC streams, the constraints from the AAC audio profile are applied. For AAC Main, LTP, SSR and others, the Main profile is used.

The audio_config parameter follows the following format, starting from the most significant bit of the first byte:

gst_codec_utils_aac_get_channels ()

guint
gst_codec_utils_aac_get_channels (const guint8 *audio_config,
                                  guint len);

Returns the channels of the given AAC stream.

gst_codec_utils_aac_get_sample_rate ()

guint
gst_codec_utils_aac_get_sample_rate (const guint8 *audio_config,
                                     guint len);

Translates the sample rate index found in AAC headers to the actual sample rate.

gst_codec_utils_aac_caps_set_level_and_profile ()

gboolean
gst_codec_utils_aac_caps_set_level_and_profile
                               (GstCaps *caps,
                                const guint8 *audio_config,
                                guint len);

Sets the level and profile on caps if it can be determined from audio_config . See gst_codec_utils_aac_get_level() and gst_codec_utils_aac_get_profile() for more details on the parameters. caps must be audio/mpeg caps with an "mpegversion" field of either 2 or 4. If mpegversion is 4, the "base-profile" field is also set in caps .

gst_codec_utils_h264_get_profile ()

const gchar *
gst_codec_utils_h264_get_profile (const guint8 *sps,
                                  guint len);

Converts the profile indication (profile_idc) in the stream's sequence parameter set into a string. The SPS is expected to have the following format, as defined in the H.264 specification. The SPS is viewed as a bitstream here, with bit 0 being the most significant bit of the first byte.

gst_codec_utils_h264_get_level ()

const gchar *
gst_codec_utils_h264_get_level (const guint8 *sps,
                                guint len);

Converts the level indication (level_idc) in the stream's sequence parameter set into a string. The SPS is expected to have the same format as for gst_codec_utils_h264_get_profile().

gst_codec_utils_h264_caps_set_level_and_profile ()

gboolean
gst_codec_utils_h264_caps_set_level_and_profile
                               (GstCaps *caps,
                                const guint8 *sps,
                                guint len);

Sets the level and profile in caps if it can be determined from sps . See gst_codec_utils_h264_get_level() and gst_codec_utils_h264_get_profile() for more details on the parameters.

gst_codec_utils_h264_get_level_idc ()

guint8
gst_codec_utils_h264_get_level_idc (const gchar *level);

Transform a level string from the caps into the level_idc

gst_codec_utils_h265_get_profile ()

const gchar *
gst_codec_utils_h265_get_profile (const guint8 *profile_tier_level,
                                  guint len);

Converts the profile indication (general_profile_idc) in the stream's profile_level_tier structure into a string. The profile_tier_level is expected to have the following format, as defined in the H.265 specification. The profile_tier_level is viewed as a bitstream here, with bit 0 being the most significant bit of the first byte.

gst_codec_utils_h265_get_tier ()

const gchar *
gst_codec_utils_h265_get_tier (const guint8 *profile_tier_level,
                               guint len);

Converts the tier indication (general_tier_flag) in the stream's profile_tier_level structure into a string. The profile_tier_level is expected to have the same format as for gst_codec_utils_h264_get_profile().

gst_codec_utils_h265_get_level ()

const gchar *
gst_codec_utils_h265_get_level (const guint8 *profile_tier_level,
                                guint len);

Converts the level indication (general_level_idc) in the stream's profile_tier_level structure into a string. The profiel_tier_level is expected to have the same format as for gst_codec_utils_h264_get_profile().

gst_codec_utils_h265_get_level_idc ()

guint8
gst_codec_utils_h265_get_level_idc (const gchar *level);

Transform a level string from the caps into the level_idc

gst_codec_utils_h265_caps_set_level_tier_and_profile ()

gboolean
gst_codec_utils_h265_caps_set_level_tier_and_profile
                               (GstCaps *caps,
                                const guint8 *profile_tier_level,
                                guint len);

Sets the level, tier and profile in caps if it can be determined from profile_tier_level . See gst_codec_utils_h265_get_level(), gst_codec_utils_h265_get_tier() and gst_codec_utils_h265_get_profile() for more details on the parameters.

gst_codec_utils_mpeg4video_get_profile ()

const gchar *
gst_codec_utils_mpeg4video_get_profile
                               (const guint8 *vis_obj_seq,
                                guint len);

Converts the profile indication in the stream's visual object sequence into a string. vis_obj_seq is expected to be the data following the visual object sequence start code. Only the first byte (profile_and_level_indication) is used.

gst_codec_utils_mpeg4video_get_level ()

const gchar *
gst_codec_utils_mpeg4video_get_level (const guint8 *vis_obj_seq,
                                      guint len);

Converts the level indication in the stream's visual object sequence into a string. vis_obj_seq is expected to be the data following the visual object sequence start code. Only the first byte (profile_and_level_indication) is used.

gst_codec_utils_mpeg4video_caps_set_level_and_profile ()

gboolean
gst_codec_utils_mpeg4video_caps_set_level_and_profile
                               (GstCaps *caps,
                                const guint8 *vis_obj_seq,
                                guint len);

Sets the level and profile in caps if it can be determined from vis_obj_seq . See gst_codec_utils_mpeg4video_get_level() and gst_codec_utils_mpeg4video_get_profile() for more details on the parameters.

gst_codec_utils_opus_create_caps ()

GstCaps *
gst_codec_utils_opus_create_caps (guint32 rate,
                                  guint8 channels,
                                  guint8 channel_mapping_family,
                                  guint8 stream_count,
                                  guint8 coupled_count,
                                  const guint8 *channel_mapping);

Creates Opus caps from the given parameters.

Since: 1.8

gst_codec_utils_opus_create_caps_from_header ()

GstCaps *
gst_codec_utils_opus_create_caps_from_header
                               (GstBuffer *header,
                                GstBuffer *comments);

Creates Opus caps from the given OpusHead header and comment header comments .

Since: 1.8

gst_codec_utils_opus_parse_caps ()

gboolean
gst_codec_utils_opus_parse_caps (GstCaps *caps,
                                 guint32 *rate,
                                 guint8 *channels,
                                 guint8 *channel_mapping_family,
                                 guint8 *stream_count,
                                 guint8 *coupled_count,
                                 guint8 channel_mapping[256]);

Parses Opus caps and fills the different fields with defaults if possible.

Since: 1.8

gst_codec_utils_opus_create_header ()

GstBuffer *
gst_codec_utils_opus_create_header (guint32 rate,
                                    guint8 channels,
                                    guint8 channel_mapping_family,
                                    guint8 stream_count,
                                    guint8 coupled_count,
                                    const guint8 *channel_mapping,
                                    guint16 pre_skip,
                                    gint16 output_gain);

Creates OpusHead header from the given parameters.

Since: 1.8

gst_codec_utils_opus_parse_header ()

gboolean
gst_codec_utils_opus_parse_header (GstBuffer *header,
                                   guint32 *rate,
                                   guint8 *channels,
                                   guint8 *channel_mapping_family,
                                   guint8 *stream_count,
                                   guint8 *coupled_count,
                                   guint8 channel_mapping[256],
                                   guint16 *pre_skip,
                                   gint16 *output_gain);

Parses the OpusHead header.

Since: 1.8