sha1(n) SHA-x Message-Digest Algorithm sha1(n) ______________________________________________________________________________
NAME
sha1 - SHA1 Message-Digest Algorithm
SYNOPSIS
package require Tcl 8.2
package require sha1 ?2.0.3?
::sha1::sha1 ?-hex|-bin? [ -channel channel | -file filename | string ]
::sha1::hmac key string
::sha1::hmac ?-hex|-bin? -key key [ -channel channel | -file filename |
string ]
::sha1::SHA1Init
::sha1::SHA1Update token data
::sha1::SHA1Final token
::sha1::HMACInit key
::sha1::HMACUpdate token data
::sha1::HMACFinal token
_________________________________________________________________
DESCRIPTION
This package provides an implementation in Tcl of the SHA1 message-
digest algorithm as specified by FIPS PUB 180-1 (1). This algorithm
takes a message and generates a 160-bit digest from the input. The SHA1
algorithm is related to the MD4 algorithm (2) but has been strengthend
against certain types of cryptographic attack. SHA1 should be used in
preference to MD4 or MD5 in new applications.
This package also includes support for creating keyed message-digests
using the HMAC algorithm from RFC 2104 (3) with SHA1 as the message-
digest.
COMMANDS
::sha1::sha1 ?-hex|-bin? [ -channel channel | -file filename | string ]
The command takes a message and returns the SHA1 digest of this
message as a hexadecimal string. You may request the result as
binary data by giving -bin.
The data to be hashed can be specified either as a string argu-
ment to the sha1 command, or as a filename or a pre-opened chan-
nel. If the -filename argument is given then the file is opened,
the data read and hashed and the file is closed. If the -channel
argument is given then data is read from the channel until the
end of file. The channel is not closed. NOTE use of the channel
or filename options results in the internal use of vwait. To
avoid nested event loops in Tk or tclhttpd applications you
should use the incremental programming API (see below).
Only one of -file, -channel or string should be given.
::sha1::hmac key string
::sha1::hmac ?-hex|-bin? -key key [ -channel channel | -file filename |
string ]
Calculate an Hashed Message Authentication digest (HMAC) using
the SHA1 digest algorithm. HMACs are described in RFC 2104 (3)
and provide an SHA1 digest that includes a key. All options
other than -key are as for the ::sha1::sha1 command.
PROGRAMMING INTERFACE
For the programmer, the SHA1 hash can be viewed as a bucket into which
one pours data. When you have finished, you extract a value that is
derived from the data that was poured into the bucket. The programming
interface to the SHA1 hash operates on a token (equivalent to the
bucket). You call SHA1Init to obtain a token and then call SHA1Update
as many times as required to add data to the hash. To release any
resources and obtain the hash value, you then call SHA1Final. An equiv-
alent set of functions gives you a keyed digest (HMAC).
If you have critcl and have built the tcllibc package then the imple-
mentation of the hashing function will be performed by compiled code.
Failing that if you have the Trf package then this can be used other-
wise there is a pure-tcl equivalent. The programming interface remains
the same in all cases.
::sha1::SHA1Init
Begins a new SHA1 hash. Returns a token ID that must be used for
the remaining functions.
::sha1::SHA1Update token data
Add data to the hash identified by token. Calling SHA1Update
$token "abcd" is equivalent to calling SHA1Update $token "ab"
followed by SHA1Update $token "cb". See EXAMPLES.
::sha1::SHA1Final token
Returns the hash value and releases any resources held by this
token. Once this command completes the token will be invalid.
The result is a binary string of 20 bytes representing the 160
bit SHA1 digest value.
::sha1::HMACInit key
This is equivalent to the ::sha1::SHA1Init command except that
it requires the key that will be included in the HMAC.
::sha1::HMACUpdate token data
::sha1::HMACFinal token
These commands are identical to the SHA1 equivalent commands.
EXAMPLES
% sha1::sha1 "Tcl does SHA1"
285a6a91c45a9066bf39fcf24425796ef0b2a8bf
% sha1::hmac Sekret "Tcl does SHA1"
ae6251fa51b95b18cba2be95eb031d07475ff03c
% set tok [sha1::SHA1Init]
::sha1::1
% sha1::SHA1Update $tok "Tcl "
% sha1::SHA1Update $tok "does "
% sha1::SHA1Update $tok "SHA1"
% sha1::Hex [sha1::SHA1Final $tok]
285a6a91c45a9066bf39fcf24425796ef0b2a8bf
REFERENCES
[1] "Secure Hash Standard", National Institute of Standards and
Technology, U.S. Department Of Commerce, April 1995.
(http://www.itl.nist.gov/fipspubs/fip180-1.htm)
[2] Rivest, R., "The MD4 Message Digest Algorithm", RFC 1320, MIT,
April 1992. (http://www.rfc-editor.org/rfc/rfc1320.txt)
[3] Krawczyk, H., Bellare, M. and Canetti, R. "HMAC: Keyed-Hashing
for Message Authentication", RFC 2104, February 1997.
(http://www.rfc-editor.org/rfc/rfc2104.txt)
BUGS, IDEAS, FEEDBACK
This document, and the package it describes, will undoubtedly contain
bugs and other problems. Please report such in the category sha1 of
the Tcllib SF Trackers [http://source-
forge.net/tracker/?group_id=12883]. Please also report any ideas for
enhancements you may have for either package and/or documentation.
SEE ALSO
md4(n), md5(n), ripemd128(n), ripemd160(n)
KEYWORDS
FIPS 180-1, hashing, message-digest, rfc 2104, security, sha1
CATEGORY
Hashes, checksums, and encryption
COPYRIGHT
Copyright (c) 2005, Pat Thoyts <patthoyts@users.sourceforge.net>
sha1 2.0.3 sha1(n)
Mac OS X 10.8 - Generated Thu Sep 13 05:31:26 CDT 2012