manpagez: man pages & more
man yasm_arch(7)
Home | html | info | man
yasm_arch(7)             Yasm Supported Architectures             yasm_arch(7)




NAME

       yasm_arch - Yasm Supported Target Architectures


SYNOPSIS

       yasm -a arch [-m machine] ...


DESCRIPTION

       The standard Yasm distribution includes a number of modules for
       different target architectures. Each target architecture can support
       one or more machine architectures.

       The architecture and machine are selected on the yasm(1) command line
       by use of the -a arch and -m machine command line options,
       respectively.

       The machine architecture may also automatically be selected by certain
       object formats. For example, the "elf32" object format selects the
       "x86" machine architecture by default, while the "elf64" object format
       selects the "amd64" machine architecture by default.


X86 ARCHITECTURE

       The "x86" architecture supports the IA-32 instruction set and
       derivatives and the AMD64 instruction set. It consists of two machines:
       "x86" (for the IA-32 and derivatives) and "amd64" (for the AMD64 and
       derivatives). The default machine for the "x86" architecture is the
       "x86" machine.

   BITS Setting
       The x86 architecture BITS setting specifies to Yasm the processor mode
       in which the generated code is intended to execute. x86 processors can
       run in three different major execution modes: 16-bit, 32-bit, and on
       AMD64-supporting processors, 64-bit. As the x86 instruction set
       contains portions whose function is execution-mode dependent (such as
       operand-size and address-size override prefixes), Yasm cannot assemble
       x86 instructions correctly unless it is told by the user in what
       processor mode the code will execute.

       The BITS setting can be changed in a variety of ways. When using the
       NASM-compatible parser, the BITS setting can be changed directly via
       the use of the BITS xx assembler directive. The default BITS setting is
       determined by the object format in use.

   BITS 64 Extensions
       The AMD64 architecture is a new 64-bit architecture developed by AMD,
       based on the 32-bit x86 architecture. It extends the original x86
       architecture by doubling the number of general purpose and SIMD
       registers, extending the arithmetic operations and address space to 64
       bits, as well as other features.

       Recently, Intel has introduced an essentially identical version of
       AMD64 called EM64T.

       When an AMD64-supporting processor is executing in 64-bit mode, a
       number of additional extensions are available, including extra general
       purpose registers, extra SSE2 registers, and RIP-relative addressing.

       Yasm extends the base NASM syntax to support AMD64 as follows. To
       enable assembly of instructions for the 64-bit mode of AMD64
       processors, use the directive BITS 64. As with NASM's BITS directive,
       this does not change the format of the output object file to 64 bits;
       it only changes the assembler mode to assume that the instructions
       being assembled will be run in 64-bit mode. To specify an AMD64 object
       file, use -m amd64 on the Yasm command line, or explicitly target a
       64-bit object format such as -f win64 or -f elf64.  -f elfx32 can be
       used to select 32-bit ELF object format for AMD64 processors.

       Register Changes
           The additional 64-bit general purpose registers are named r8-r15.
           There are also 8-bit (rXb), 16-bit (rXw), and 32-bit (rXd)
           subregisters that map to the least significant 8, 16, or 32 bits of
           the 64-bit register. The original 8 general purpose registers have
           also been extended to 64-bits: eax, edx, ecx, ebx, esi, edi, esp,
           and ebp have new 64-bit versions called rax, rdx, rcx, rbx, rsi,
           rdi, rsp, and rbp respectively. The old 32-bit registers map to the
           least significant bits of the new 64-bit registers.

           New 8-bit registers are also available that map to the 8 least
           significant bits of rsi, rdi, rsp, and rbp. These are called sil,
           dil, spl, and bpl respectively. Unfortunately, due to the way
           instructions are encoded, these new 8-bit registers are encoded the
           same as the old 8-bit registers ah, dh, ch, and bh. The processor
           tells which is being used by the presence of the new REX prefix
           that is used to specify the other extended registers. This means it
           is illegal to mix the use of ah, dh, ch, and bh with an instruction
           that requires the REX prefix for other reasons. For instance:

               add ah, [r10]

           (NASM syntax) is not a legal instruction because the use of r10
           requires a REX prefix, making it impossible to use ah.

           In 64-bit mode, an additional 8 SSE2 registers are also available.
           These are named xmm8-xmm15.

       64 Bit Instructions
           By default, most operations in 64-bit mode remain 32-bit;
           operations that are 64-bit usually require a REX prefix (one bit in
           the REX prefix determines whether an operation is 64-bit or
           32-bit). Thus, essentially all 32-bit instructions have a 64-bit
           version, and the 64-bit versions of instructions can use extended
           registers "for free" (as the REX prefix is already present).
           Examples in NASM syntax:

               mov eax, 1  ; 32-bit instruction

               mov rcx, 1  ; 64-bit instruction

           Instructions that modify the stack (push, pop, call, ret, enter,
           and leave) are implicitly 64-bit. Their 32-bit counterparts are not
           available, but their 16-bit counterparts are. Examples in NASM
           syntax:

               push eax  ; illegal instruction

               push rbx  ; 1-byte instruction

               push r11  ; 2-byte instruction with REX prefix

       Implicit Zero Extension
           Results of 32-bit operations are implicitly zero-extended to the
           upper 32 bits of the corresponding 64-bit register. 16 and 8 bit
           operations, on the other hand, do not affect upper bits of the
           register (just as in 32-bit and 16-bit modes). This can be used to
           generate smaller code in some instances. Examples in NASM syntax:

               mov ecx, 1  ; 1 byte shorter than mov rcx, 1

               and edx, 3  ; equivalent to and rdx, 3

       Immediates
           For most instructions in 64-bit mode, immediate values remain 32
           bits; their value is sign-extended into the upper 32 bits of the
           target register prior to being used. The exception is the mov
           instruction, which can take a 64-bit immediate when the destination
           is a 64-bit register. Examples in NASM syntax:

               add rax, 1           ; optimized down to signed 8-bit

               add rax, dword 1     ; force size to 32-bit

               add rax, 0xffffffff  ; sign-extended 32-bit

               add rax, -1          ; same as above

               add rax, 0xffffffffffffffff ; truncated to 32-bit (warning)

               mov eax, 1           ; 5 byte

               mov rax, 1           ; 5 byte (optimized to signed 32-bit)

               mov rax, qword 1     ; 10 byte (forced 64-bit)

               mov rbx, 0x1234567890abcdef ; 10 byte

               mov rcx, 0xffffffff  ; 10 byte (does not fit in signed 32-bit)

               mov ecx, -1          ; 5 byte, equivalent to above

               mov rcx, sym         ; 5 byte, 32-bit size default for symbols

               mov rcx, qword sym   ; 10 byte, override default size

           The handling of mov reg64, unsized immediate is different between
           YASM and NASM 2.x; YASM follows the above behavior, while NASM 2.x
           does the following:

               add rax, 0xffffffff  ; sign-extended 32-bit immediate

               add rax, -1          ; same as above

               add rax, 0xffffffffffffffff ; truncated 32-bit (warning)

               add rax, sym         ; sign-extended 32-bit immediate

               mov eax, 1           ; 5 byte (32-bit immediate)

               mov rax, 1           ; 10 byte (64-bit immediate)

               mov rbx, 0x1234567890abcdef ; 10 byte instruction

               mov rcx, 0xffffffff  ; 10 byte instruction

               mov ecx, -1          ; 5 byte, equivalent to above

               mov ecx, sym         ; 5 byte (32-bit immediate)

               mov rcx, sym         ; 10 byte instruction

               mov rcx, qword sym   ; 10 byte (64-bit immediate)

       Displacements
           Just like immediates, displacements, for the most part, remain 32
           bits and are sign extended prior to use. Again, the exception is
           one restricted form of the mov instruction: between the
           al/ax/eax/rax register and a 64-bit absolute address (no registers
           allowed in the effective address). In NASM syntax, use of the
           64-bit absolute form requires [qword]. Examples in NASM syntax:

               mov eax, [1]    ; 32 bit, with sign extension

               mov al, [rax-1] ; 32 bit, with sign extension

               mov al, [qword 0x1122334455667788] ; 64-bit absolute

               mov al, [0x1122334455667788] ; truncated to 32-bit (warning)

       RIP Relative Addressing
           In 64-bit mode, a new form of effective addressing is available to
           make it easier to write position-independent code. Any memory
           reference may be made RIP relative (RIP is the instruction pointer
           register, which contains the address of the location immediately
           following the current instruction).

           In NASM syntax, there are two ways to specify RIP-relative
           addressing:

               mov dword [rip+10], 1

           stores the value 1 ten bytes after the end of the instruction.  10
           can also be a symbolic constant, and will be treated the same way.
           On the other hand,

               mov dword [symb wrt rip], 1

           stores the value 1 into the address of symbol symb. This is
           distinctly different than the behavior of:

               mov dword [symb+rip], 1

           which takes the address of the end of the instruction, adds the
           address of symb to it, then stores the value 1 there. If symb is a
           variable, this will not store the value 1 into the symb variable!

           Yasm also supports the following syntax for RIP-relative
           addressing:

               mov [rel sym], rax  ; RIP-relative

               mov [abs sym], rax  ; not RIP-relative

           The behavior of:

               mov [sym], rax

           Depends on a mode set by the DEFAULT directive, as follows. The
           default mode is always "abs", and in "rel" mode, use of registers,
           an fs or gs segment override, or an explicit "abs" override will
           result in a non-RIP-relative effective address.

               default rel

               mov [sym], rbx      ; RIP-relative

               mov [abs sym], rbx  ; not RIP-relative (explicit override)

               mov [rbx+1], rbx    ; not RIP-relative (register use)

               mov [fs:sym], rbx   ; not RIP-relative (fs or gs use)

               mov [ds:sym], rbx   ; RIP-relative (segment, but not fs or gs)

               mov [rel sym], rbx  ; RIP-relative (redundant override)

               default abs

               mov [sym], rbx      ; not RIP-relative

               mov [abs sym], rbx  ; not RIP-relative

               mov [rbx+1], rbx    ; not RIP-relative

               mov [fs:sym], rbx   ; not RIP-relative

               mov [ds:sym], rbx   ; not RIP-relative

               mov [rel sym], rbx  ; RIP-relative (explicit override)

       Memory references
           Usually the size of a memory reference can be deduced by which
           registers you're moving--for example, "mov [rax],ecx" is a 32-bit
           move, because ecx is 32 bits. YASM currently gives the non-obvious
           "invalid combination of opcode and operands" error if it can't
           figure out how much memory you're moving. The fix in this case is
           to add a memory size specifier: qword, dword, word, or byte.

           Here's a 64-bit memory move, which sets 8 bytes starting at rax:

               mov qword [rax], 1

           Here's a 32-bit memory move, which sets 4 bytes:

               mov dword [rax], 1

           Here's a 16-bit memory move, which sets 2 bytes:

               mov word [rax], 1

           Here's an 8-bit memory move, which sets 1 byte:

               mov byte [rax], 1


LC3B ARCHITECTURE

       The "lc3b" architecture supports the LC-3b ISA as used in the ECE 312
       (now ECE 411) course at the University of Illinois, Urbana-Champaign,
       as well as other university courses. See
       http://courses.ece.uiuc.edu/ece411/ for more details and example code.
       The "lc3b" architecture consists of only one machine: "lc3b".


SEE ALSO

       yasm(1)


BUGS

       When using the "x86" architecture, it is overly easy to generate AMD64
       code (using the BITS 64 directive) and generate a 32-bit object file
       (by failing to specify -m amd64 on the command line or selecting a
       64-bit object format). Similarly, specifying -m amd64 does not default
       the BITS setting to 64. An easy way to avoid this is by directly
       specifying a 64-bit object format such as -f elf64.


AUTHOR

       Peter Johnson <peter@tortall.net>
           Author.


COPYRIGHT

       Copyright (C) 2004, 2005, 2006, 2007 Peter Johnson



Yasm                             October 2006                     yasm_arch(7)

yasm 1.3.0 - Generated Mon Aug 25 18:59:22 CDT 2014
© manpagez.com 2000-2024
Individual documents may contain additional copyright information.