BIO_S_DGRAM_PAIR(3ossl) OpenSSL BIO_S_DGRAM_PAIR(3ossl)
NAME
BIO_s_dgram_pair, BIO_new_bio_dgram_pair, BIO_dgram_set_no_trunc,
BIO_dgram_get_no_trunc, BIO_dgram_get_effective_caps,
BIO_dgram_get_caps, BIO_dgram_set_caps, BIO_dgram_set_mtu,
BIO_dgram_get_mtu - datagram pair BIO
SYNOPSIS
#include <openssl/bio.h>
const BIO_METHOD *BIO_s_dgram_pair(void);
int BIO_new_bio_dgram_pair(BIO **bio1, size_t writebuf1,
BIO **bio2, size_t writebuf2);
int BIO_dgram_set_no_trunc(BIO *bio, int enable);
int BIO_dgram_get_no_trunc(BIO *bio);
uint32_t BIO_dgram_get_effective_caps(BIO *bio);
uint32_t BIO_dgram_get_caps(BIO *bio);
int BIO_dgram_set_caps(BIO *bio, uint32_t caps);
int BIO_dgram_set_mtu(BIO *bio, unsigned int mtu);
unsigned int BIO_dgram_get_mtu(BIO *bio);
DESCRIPTION
BIO_s_dgram_pair(3) returns the method for a BIO datagram pair. A BIO
datagram pair is similar to a BIO pair (see BIO_s_bio(3)) but has
datagram semantics. Broadly, this means that the length of the buffer
passed to a write call will match that retrieved by a read call. If the
buffer passed to a read call is too short, the datagram is truncated or
the read fails, depending on how the BIO is configured.
The BIO datagram pair attaches certain metadata to each write, such as
source and destination addresses. This information may be retrieved on
read.
A typical application of a BIO datagram pair is to allow an application
to keep all datagram network I/O requested by libssl under application
control.
The BIO datagram pair is designed to support multithreaded use where
certain restrictions are observed; see THREADING.
The BIO datagram pair allows each half of a pair to signal to the other
half whether they support certain capabilities; see CAPABILITY
INDICATION.
BIO_new_bio_dgram_pair() combines the calls to BIO_new(3),
BIO_make_bio_pair(3) and BIO_set_write_buf_size(3) to create a
connected pair of BIOs bio1, bio2 with write buffer sizes writebuf1 and
writebuf2. If either size is zero then the default size is used.
BIO_make_bio_pair(3) may be used to join two datagram pair BIOs into a
pair. The two BIOs must both use the method returned by
BIO_s_dgram_pair(3) and neither of the BIOs may currently be associated
in a pair.
BIO_destroy_bio_pair(3) destroys the association between two connected
BIOs. Freeing either half of the pair will automatically destroy the
association.
BIO_reset(3) clears any data in the write buffer of the given BIO. This
means that the opposite BIO in the pair will no longer have any data
waiting to be read.
The BIO maintains a fixed size internal write buffer. When the buffer
is full, further writes will fail until the buffer is drained via calls
to BIO_read(3). The size of the buffer can be changed using
BIO_set_write_buf_size(3) and queried using BIO_get_write_buf_size(3).
Note that the write buffer is partially consumed by metadata stored
internally which is attached to each datagram, such as source and
destination addresses. The size of this overhead is undefined and may
change between releases.
The standard BIO_ctrl_pending(3) call has modified behaviour and
returns the size of the next datagram waiting to be read in bytes. An
application can use this function to ensure it provides an adequate
buffer to a subsequent read call. If no datagram is waiting to be read,
zero is returned.
This BIO does not support sending or receiving zero-length datagrams.
Passing a zero-length buffer to BIO_write is treated as a no-op.
BIO_eof(3) returns 1 only if the given BIO datagram pair BIO is not
currently connected to a peer BIO.
BIO_get_write_guarantee(3) and BIO_ctrl_get_write_guarantee(3) return
how large a datagram the next call to BIO_write(3) can accept. If there
is not enough space in the write buffer to accept another datagram
equal in size to the configured MTU, zero is returned (see below). This
is intended to avoid a situation where an application attempts to read
a datagram from a network intending to write it to a BIO datagram pair,
but where the received datagram ends up being too large to write to the
BIO datagram pair.
BIO_dgram_set_no_trunc() and BIO_ctrl_get_no_trunc() set and retrieve
the truncation mode for the given half of a BIO datagram pair. When no-
truncate mode is enabled, BIO_read() will fail if the buffer provided
is inadequate to hold the next datagram to be read. If no-truncate mode
is disabled (the default), the datagram will be silently truncated.
This default behaviour maintains compatibility with the semantics of
the Berkeley sockets API.
BIO_dgram_set_mtu() and BIO_dgram_get_mtu() may be used to set an
informational MTU value on the BIO datagram pair. If
BIO_dgram_set_mtu() is used on a BIO which is currently part of a BIO
datagram pair, the MTU value is set on both halves of the pair. The
value does not affect the operation of the BIO datagram pair (except
for BIO_get_write_guarantee(); see above) but may be used by other code
to determine a requested MTU. When a BIO datagram pair BIO is created,
the MTU is set to an unspecified but valid value.
BIO_flush(3) is a no-op.
NOTES
The halves of a BIO datagram pair have independent lifetimes and must
be separately freed.
THREADING
BIO_recvmmsg(3), BIO_sendmmsg(3), BIO_read(3), BIO_write(3),
BIO_pending(3), BIO_get_write_guarantee(3) and BIO_flush(3) may be used
by multiple threads simultaneously on the same BIO datagram pair.
Specific BIO_ctrl(3) operations (namely BIO_CTRL_PENDING,
BIO_CTRL_FLUSH and BIO_C_GET_WRITE_GUARANTEE) may also be used.
Invoking any other BIO call, or any other BIO_ctrl(3) operation, on
either half of a BIO datagram pair while any other BIO call is also in
progress to either half of the same BIO datagram pair results in
undefined behaviour.
CAPABILITY INDICATION
The BIO datagram pair can be used to enqueue datagrams which have
source and destination addresses attached. It is important that the
component consuming one side of a BIO datagram pair understand whether
the other side of the pair will honour any source and destination
addresses it attaches to each datagram. For example, if datagrams are
queued with destination addresses set but simply read by simple calls
to BIO_read(3), the destination addresses will be discarded.
Each half of a BIO datagram pair can have capability flags set on it
which indicate whether source and destination addresses will be
honoured by the reader and whether they will be provided by the writer.
These capability flags should be set via a call to
BIO_dgram_set_caps(), and these capabilities will be reflected in the
value returned by BIO_dgram_get_effective_caps() on the opposite BIO.
If necessary, the capability value previously set can be retrieved
using BIO_dgram_get_caps(). Note that BIO_dgram_set_caps() on a given
BIO controls the capabilities advertised to the peer, and
BIO_dgram_get_effective_caps() on a given BIO determines the
capabilities advertised by the peer of that BIO.
The following capabilities are available:
BIO_DGRAM_CAP_HANDLES_SRC_ADDR
The user of the datagram pair BIO promises to honour source
addresses provided with datagrams written to the BIO pair.
BIO_DGRAM_CAP_HANDLES_DST_ADDR
The user of the datagram pair BIO promises to honour destination
addresses provided with datagrams written to the BIO pair.
BIO_DGRAM_CAP_PROVIDES_SRC_ADDR
The user of the datagram pair BIO advertises the fact that it will
provide source addressing information with future writes to the BIO
pair, where available.
BIO_DGRAM_CAP_PROVIDES_DST_ADDR
The user of the datagram pair BIO advertises the fact that it will
provide destination addressing information with future writes to
the BIO pair, where available.
If a caller attempts to specify a destination address (for example,
using BIO_sendmmsg(3)) and the peer has not advertised the
BIO_DGRAM_CAP_HANDLES_DST_ADDR capability, the operation fails. Thus,
capability negotiation is mandatory.
If a caller attempts to specify a source address when writing, or
requests a destination address when receiving, and local address
support has not been enabled, the operation fails; see
BIO_dgram_set_local_addr_enable(3).
If a caller attempts to enable local address support using
BIO_dgram_set_local_addr_enable(3) and BIO_dgram_get_local_addr_cap(3)
does not return 1 (meaning that the peer has not advertised both the
BIO_DGRAM_CAP_HANDLES_SRC_ADDR and the BIO_DGRAM_CAP_PROVIDES_DST_ADDR
capability), the operation fails.
BIO_DGRAM_CAP_PROVIDES_SRC_ADDR and BIO_DGRAM_CAP_PROVIDES_DST_ADDR
indicate that the application using that half of a BIO datagram pair
promises to provide source and destination addresses respectively when
writing datagrams to that half of the BIO datagram pair. However, these
capability flags do not affect the behaviour of the BIO datagram pair.
RETURN VALUES
BIO_new_bio_dgram_pair() returns 1 on success, with the new BIOs
available in bio1 and bio2, or 0 on failure, with NULL pointers stored
into the locations for bio1 and bio2. Check the error stack for more
information.
BIO_dgram_set_no_trunc(), BIO_dgram_set_caps() and BIO_dgram_set_mtu()
return 1 on success and 0 on failure.
BIO_dgram_get_no_trunc() returns 1 if no-truncate mode is enabled on a
BIO, or 0 if no-truncate mode is not enabled or not supported on a
given BIO.
BIO_dgram_get_effective_caps() and BIO_dgram_get_caps() return zero if
no capabilities are supported.
BIO_dgram_get_mtu() returns the MTU value configured on the BIO, or
zero if the operation is not supported.
SEE ALSO
BIO_s_bio(3), bio(7)
COPYRIGHT
Copyright 2022 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
in the file LICENSE in the source distribution or at
<https://www.openssl.org/source/license.html>.
3.2.0 2023-11-23 BIO_S_DGRAM_PAIR(3ossl)
openssl 3.2.0 - Generated Sat Dec 2 11:08:38 CST 2023