PERL5218DELTA(1pm) Perl Programmers Reference Guide PERL5218DELTA(1pm)
NAME
perl5218delta - what is new for perl v5.21.8
DESCRIPTION
This document describes differences between the 5.21.7 release and the
5.21.8 release.
If you are upgrading from an earlier release such as 5.21.6, first read
perl5217delta, which describes differences between 5.21.6 and 5.21.7.
Notice
With this release we are now in the contentious changes portion of the
code freeze as we prepare for the next stable release of Perl 5.
Core Enhancements
The warnings pragma now supports warnings outside of "all"
Ever since perl v5.6.0 we've had no way of adding new warnings without
retroactively adding them to all existing programs that used "-w", "-W"
or "use warnings".
This caused us to not add new useful warnings out of fear that they
might unduly burden users who just wanted to upgrade perl and didn't
want to deal with a bunch of warnings from their existing code.
We now support a way to have our cake and eat it too, and can add new
warnings to the core going forward through other top-level warning
categories. See the warnings documentation for details.
Non-Capturing Regular Expression Flag
Regular expressions now support a "/n" flag that disables capturing and
filling in $1, $2, etc... inside of groups:
"hello" =~ /(hi|hello)/n; # $1 is not set
This is equivalent to putting "?:" at the beginning of every capturing
group.
See "n" in perlre for more information.
"prototype" with no arguments
"prototype()" with no arguments now infers $_. [perl #123514]
"use re 'strict'"
This applies stricter syntax rules to regular expression patterns
compiled within its scope, which hopefully will alert you to typos and
other unintentional behavior that backwards-compatibility issues
prevent us from doing in normal regular expression compilations.
Because the behavior of this is subject to change in future Perl
releases as we gain experience, using this pragma will raise a category
"experimental:re_strict" warning. See 'strict' in re.
New "const" subroutine attribute
The "const" attribute can be applied to an anonymous subroutine. It
causes it to be executed immediately when it is cloned. Its value is
captured and used to create a new constant subroutine that is returned.
This feature is experimental. See "Constant Functions" in perlsub.
Incompatible Changes
sub signatures moved before attributes
The experimental sub signatures feature, as introduced in 5.20, parsed
signatures after attributes. In this release, the positioning has been
moved such that signatures occur in exactly the same positioning a
prototype would be found.
Modules and Pragmata
Updated Modules and Pragmata
o arybase has been upgraded from version 0.09 to 0.10.
o attributes has been upgraded from version 0.24 to 0.25.
Minor internal change only.
o autodie has been upgraded from version 2.25 to 2.26.
o B has been upgraded from version 1.54 to 1.55.
A bug where, after an ithread creation or psuedofork,
special/immortal SVs in the child ithread/psuedoprocess did not
have the correct class of "B::SPECIAL", has been fixed.
The "id" and "outid" PADLIST methods have been added.
o B::Deparse has been upgraded from version 1.31 to 1.32.
Deparsing "BEGIN { undef &foo }" with the -w switch enabled started
to emit 'uninitialized' warnings in Perl 5.14. This has been
fixed.
Deparsing calls to subs with a "(;+)" prototype resulted in an
infinite loop. The "(;$") "(_)" and "(;_)" prototypes were given
the wrong precedence, causing "foo($a<$b)" to be deparsed without
the parentheses.
o Compress::Raw::Bzip2 has been upgraded from version 2.067 to 2.068.
o Compress::Raw::Zlib has been upgraded from version 2.067 to 2.068.
o CPAN::Meta::Requirements has been upgraded from version 2.130 to
2.131.
o Data::Dumper has been upgraded from version 2.155 to 2.156.
o DB_File has been upgraded from version 1.834 to 1.835.
o Devel::Peek has been upgraded from version 1.20 to 1.21.
o Devel::PPPort has been upgraded from version 3.25 to 3.28.
o Digest::MD5 has been upgraded from version 2.53 to 2.54.
o Digest::SHA has been upgraded from version 5.93 to 5.95.
o DynaLoader has been upgraded from version 1.29 to 1.30.
o ExtUtils::Command has been upgraded from version 1.18 to 1.20.
o ExtUtils::Manifest has been upgraded from version 1.69 to 1.70.
o File::Glob has been upgraded from version 1.23 to 1.24.
Avoid SvIV() expanding to call get_sv() three times in a few
places. [perl #123606]
o Filter::Util::Call has been upgraded from version 1.51 to 1.54.
o Getopt::Long has been upgraded from version 2.42 to 2.43.
o IO::Compress::Base has been upgraded from version 2.067 to 2.068.
o IO::Socket::IP has been upgraded from version 0.34 to 0.36.
o MIME::Base64 has been upgraded from version 3.14 to 3.15.
o Module::CoreList has been upgraded from version 5.20141220 to
5.20150120.
o Module::Load::Conditional has been upgraded from version 0.62 to
0.64.
o Module::Metadata has been upgraded from version 1.000024 to
1.000026.
o Opcode has been upgraded from version 1.30 to 1.31.
o PerlIO::encoding has been upgraded from version 0.20 to 0.21.
o Pod::Simple has been upgraded from version 3.28 to 3.29.
o POSIX has been upgraded from version 1.48 to 1.49.
o re has been upgraded from version 0.28 to 0.30.
o Safe has been upgraded from version 2.38 to 2.39.
"reval" was not propagating void context properly.
o SDBM_File has been upgraded from version 1.12 to 1.13.
Simplified the build process. [perl #123413]
o Test::Harness has been upgraded from version 3.34 to 3.35.
o Test::Simple has been upgraded from version 1.301001_090 to
1.301001_097.
o Unicode::Collate has been upgraded from version 1.09 to 1.10.
o VMS::DCLsym has been upgraded from version 1.05 to 1.06.
o warnings has been upgraded from version 1.29 to 1.30.
Documentation
New Documentation
perlunicook
This document, by Tom Christiansen, provides examples of handling
Unicode in Perl.
Diagnostics
The following additions or changes have been made to diagnostic output,
including warnings and fatal error messages. For the complete list of
diagnostic messages, see perldiag.
New Diagnostics
New Errors
o Bad symbol for scalar
(P) An internal request asked to add a scalar entry to something
that wasn't a symbol table entry.
o :const is not permitted on named subroutines
(F) The "const" attribute causes an anonymous subroutine to be run
and its value captured at the time that it is cloned. Names
subroutines are not cloned like this, so the attribute does not
make sense on them.
New Warnings
o :const is experimental
(S experimental::const_attr) The "const" attribute is experimental.
If you want to use the feature, disable the warning with "no
warnings 'experimental::const_attr'", but know that in doing so you
are taking the risk that your code may break in a future Perl
version.
o Non-finite repeat count does nothing
(W numeric) You tried to execute the "x" repetition operator "Inf"
(or "-Inf") or "NaN" times, which doesn't make sense.
o Useless use of attribute "const"
(W misc) The "const" attribute has no effect except on anonymous
closure prototypes. You applied it to a subroutine via
attributes.pm. This is only useful inside an attribute handler for
an anonymous subroutine.
o Unusual use of %s in void context
(W void_unusual) Similar to the "Useless use of %s in void context"
warning, but only turned on by the top-level "pedantic" warning
category, used for e.g. "grep" in void context, which may indicate
a bug, but could also just be someone using "grep" for its side-
effects as a loop.
Enabled as part of "extra" warnings, not in the "all" category. See
warnings for details
o "use re 'strict'" is experimental
(S experimental::re_strict) The things that are different when a
regular expression pattern is compiled under 'strict' are subject
to change in future Perl releases in incompatible ways. This means
that a pattern that compiles today may not in a future Perl
release. This warning is to alert you to that risk.
Wide character (U+%X) in %s
(W locale) While in a single-byte locale (i.e., a non-UTF-8 one), a
multi-byte character was encountered. Perl considers this
character to be the specified Unicode code point. Combining
non-UTF8 locales and Unicode is dangerous. Almost certainly some
characters will have two different representations. For example,
in the ISO 8859-7 (Greek) locale, the code point 0xC3 represents a
Capital Gamma. But so also does 0x393. This will make string
comparisons unreliable.
You likely need to figure out how this multi-byte character got
mixed up with your single-byte locale (or perhaps you thought you
had a UTF-8 locale, but Perl disagrees).
o Both or neither range ends should be Unicode in regex; marked by
<-- HERE in m/%s/
(W regexp) (only under "use re 'strict'" or within "(?[...])")
In a bracketed character class in a regular expression pattern, you
had a range which has exactly one end of it specified using "\N{}",
and the other end is specified using a non-portable mechanism.
Perl treats the range as a Unicode range, that is, all the
characters in it are considered to be the Unicode characters, and
which may be different code points on some platforms Perl runs on.
For example, "[\N{U+06}-\x08]" is treated as if you had instead
said "[\N{U+06}-\N{U+08}]", that is it matches the characters whose
code points in Unicode are 6, 7, and 8. But that "\x08" might
indicate that you meant something different, so the warning gets
raised.
o Ranges of ASCII printables should be some subset of "0-9", "A-Z",
or "a-z" in regex; marked by <-- HERE in m/%s/
(W regexp) (only under "use re 'strict'" or within "(?[...])")
Stricter rules help to find typos and other errors. Perhaps you
didn't even intend a range here, if the "-" was meant to be some
other character, or should have been escaped (like "\-"). If you
did intend a range, the one that was used is not portable between
ASCII and EBCDIC platforms, and doesn't have an obvious meaning to
a casual reader.
[3-7] # OK; Obvious and portable
[d-g] # OK; Obvious and portable
[A-Y] # OK; Obvious and portable
[A-z] # WRONG; Not portable; not clear what is meant
[a-Z] # WRONG; Not portable; not clear what is meant
[%-.] # WRONG; Not portable; not clear what is meant
[\x41-Z] # WRONG; Not portable; not obvious to non-geek
(You can force portability by specifying a Unicode range, which
means that the endpoints are specified by "\N{...}", but the
meaning may still not be obvious.) The stricter rules require that
ranges that start or stop with an ASCII character that is not a
control have all their endpoints be the literal character, and not
some escape sequence (like "\x41"), and the ranges must be all
digits, or all uppercase letters, or all lowercase letters.
o Ranges of digits should be from the same group in regex; marked by
<-- HERE in m/%s/
(W regexp) (only under "use re 'strict'" or within "(?[...])")
Stricter rules help to find typos and other errors. You included a
range, and at least one of the end points is a decimal digit.
Under the stricter rules, when this happens, both end points should
be digits in the same group of 10 consecutive digits.
o "%s" is more clearly written simply as "%s" in regex; marked by <--
HERE in m/%s/
(W regexp) (only under "use re 'strict'" or within "(?[...])")
You specified a character that has the given plainer way of writing
it, and which is also portable to platforms running with different
character sets.
Changes to Existing Diagnostics
o The message Locale '%s' may not work well.%s is no longer raised
unless the problemtatic locale is actually used in the Perl
program. Previously it was raised if it merely was the underlying
locale. All Perl programs have an underlying locale at all times,
but something like a "use locale" is needed for that locale to
actually have some effect. This message will not be raised when
the underlying locale is hidden.
Configuration and Compilation
o pthreads and lcl will be linked by default if present. This allows
XS modules that require threading to work on non-threaded perls.
Note that you must still pass "-Dusethreads" if you want a threaded
perl.
Testing
o A new test script, bigmem/subst.t, has been added to test memory
usage of subst on very large strings.
o A new test script, op/anonconst.t, has been added to test
experimental :const subroutines.
o A new test script, re/reg_nocapture.t, has been added to test the
new "/n" regexp flag.
Platform Support
Platform-Specific Notes
Win32
o Previously, on Visual C++ for Win64 built Perls only, when
compiling every Perl XS module (including CPAN ones) and Perl
aware .c file with a 64 bit Visual C++, would unconditionally
have around a dozen warnings from hv_func.h. These warnings
have been silenced. GCC all bitness and Visual C++ for Win32
were not affected.
o Support for building without PerlIO has been removed from the
Windows makefiles. Non-PerlIO builds were all but deprecated
in Perl 5.18.0 and are already not supported by Configure on
POSIX systems.
o Between 2 and 6 ms and 7 I/O calls have been saved per attempt
to open a perl module for each path in @INC.
Internal Changes
o Added Perl_sv_get_backrefs() to determine if an SV is a weak-
referent.
Function either returns an SV * of type AV, which contains the set
of weakreferences which reference the passed in SV, or a simple RV
* which is the only weakref to this item.
Selected Bug Fixes
o A bug in regular expression patterns that could lead to segfaults
and other crashes has been fixed. This occurred only in patterns
compiled with "/i", while taking into account the current POSIX
locale (this usually means they have to be compiled within the
scope of "use locale"), and there must be a string of at least 128
consecutive bytes to match. [perl #123539]
o "s///" now works on very long strings instead of dying with
'Substitution loop'. [perl #103260] [perl #123071]
o "gmtime" no longer crashes with not-a-number values. [perl
#123495]
o "\()" (reference to an empty list) and "y///" with lexical $_ in
scope could do a bad write past the end of the stack. They have
been fixed to extend the stack first.
o "prototype()" with no arguments used to read the previous item on
the stack, so "print "foo", prototype()" would print foo's
prototype. It has been fixed to infer $_ instead. [perl #123514]
o Some cases of lexical state subs inside predeclared subs could
crash but no longer do.
o Some cases of nested lexical state subs inside anonymous subs could
cause 'Bizarre copy' errors or possibly even crash.
o When trying to emit warnings, perl's default debugger (perl5db.pl)
was sometimes giving 'Undefined subroutine &DB::db_warn called'
instead. This bug, which started to occur in Perl 5.18, has been
fixed. [perl #123553]
o Certain syntax errors in substitutions, such as "s/${<>{})//",
would crash, and had done so since Perl 5.10. (In some cases the
crash did not start happening till 5.16.) The crash has, of
course, been fixed. [perl #123542]
o A repeat expression like "33 x ~3" could cause a large buffer
overflow since the new output buffer size was not correctly handled
by SvGROW(). An expression like this now properly produces a
memory wrap panic. [perl 123554]
o "formline("@...", "a");" would crash. The "FF_CHECKNL" case in
pp_formline() didn't set the pointer used to mark the chop
position, which led to the "FF_MORE" case crashing with a
segmentation fault. This has been fixed. [perl #123538]
o A possible buffer overrun and crash when parsing a literal pattern
during regular expression compilation has been fixed. [perl
#123604]
Acknowledgements
Perl 5.21.8 represents approximately 4 weeks of development since Perl
5.21.7 and contains approximately 26,000 lines of changes across 750
files from 27 authors.
Excluding auto-generated files, documentation and release tools, there
were approximately 13,000 lines of changes to 410 .pm, .t, .c and .h
files.
Perl continues to flourish into its third decade thanks to a vibrant
community of users and developers. The following people are known to
have contributed the improvements that became Perl 5.21.8:
Aaron Crane, Andreas Voegele, Chad Granum, Chris 'BinGOs' Williams,
Craig A. Berry, Daniel Dragan, David Mitchell, E. Choroba, Ed J,
Father Chrysostomos, H.Merijn Brand, Hugo van der Sanden, James E
Keenan, Jarkko Hietaniemi, Karen Etheridge, Karl Williamson, Matthew
Horsfall, Max Maischein, Peter Martini, Rafael Garcia-Suarez, Ricardo
Signes, Rostislav Skudnov, Slaven Rezic, Steve Hay, Tony Cook, Yves
Orton, AEvar Arnfjoer` Bjarmason.
The list above is almost certainly incomplete as it is automatically
generated from version control history. In particular, it does not
include the names of the (very much appreciated) contributors who
reported issues to the Perl bug tracker.
Many of the changes included in this version originated in the CPAN
modules included in Perl's core. We're grateful to the entire CPAN
community for helping Perl to flourish.
For a more complete list of all of Perl's historical contributors,
please see the AUTHORS file in the Perl source distribution.
Reporting Bugs
If you find what you think is a bug, you might check the articles
recently posted to the comp.lang.perl.misc newsgroup and the perl bug
database at https://rt.perl.org/ . There may also be information at
http://www.perl.org/ , the Perl Home Page.
If you believe you have an unreported bug, please run the perlbug
program included with your release. Be sure to trim your bug down to a
tiny but sufficient test case. Your bug report, along with the output
of "perl -V", will be sent off to perlbug@perl.org to be analysed by
the Perl porting team.
If the bug you are reporting has security implications, which make it
inappropriate to send to a publicly archived mailing list, then please
send it to perl5-security-report@perl.org. This points to a closed
subscription unarchived mailing list, which includes all the core
committers, who will be able to help assess the impact of issues,
figure out a resolution, and help co-ordinate the release of patches to
mitigate or fix the problem across all platforms on which Perl is
supported. Please only use this address for security issues in the
Perl core, not for modules independently distributed on CPAN.
SEE ALSO
The Changes file for an explanation of how to view exhaustive details
on what changed.
The INSTALL file for how to build Perl.
The README file for general stuff.
The Artistic and Copying files for copyright information.
perl v5.22.0 2015-05-13 PERL5218DELTA(1pm)
perl 5.22 - Generated Fri Aug 14 15:34:19 CDT 2015