include_server(1) include_server(1)
NAME
include_server.py - conservative approximation of include dependencies
for C/C++
SYNOPSIS
include_server --port INCLUDE_SERVER_PORT [OPTIONS]
DESCRIPTION
include_server.py starts an include server process. This process
answers queries from distcc(1) clients about what files to include in
C/C++ compilations. The include_server.py command itself terminates as
soon as the include server has been spawned.
The INCLUDE_SERVER_PORT argument is the name of a socket used for all
communication between distcc clients and the include server. The
pump(1) command is responsible for creating the socket location, for
passing it to this script, and for passing it to all distcc clients via
the environment variable named INCLUDE_SERVER_PORT.
The protocol used by the include server uses distcc's RPC implementa-
tion. Each distcc request consists of (1) the current directory and (2)
the list of arguments of the compilation command.
If the include server is able to process the request, then it answers
the distcc client by sending a list of filepaths. The filepaths are
those of the compressed source and header files found to be necessary
for compilation through include analysis. The list also comprises sym-
bolic links and even dummy files needed for the compilation server to
construct an accurate replica of the parts of the filesystem needed for
compilation. In this way, a needed header file like /path/foo.h is
compressed, renamed, and stored in a temporary location, such as
/dev/shm/tmpiAvfGv.include_server-9368-1/path/foo.h.lzo. The distcc
client will pass these files on to a compilation server, where they
will be uncompressed and mounted temporarily.
If the include server is not able to process the request, then it
returns the empty list to the distcc client.
There are two kinds of failures that relate to the include server. The
include server may fail to compute the includes or fail in other ways,
see section INCLUDE SERVER SYMPTOMS. Also, the compilation on the
remove server may fail due to inadequacy of the calculated include clo-
sure, but then succeed when locally retried, see section DISTCC DIS-
CREPANCY SYMPTOMS.
OPTION SUMMARY
The following options are understood by include_server.py.
-dPAT, --debug_pattern=PAT
Bit vector for turning on warnings and debugging
1 = warnings
2 = trace some functions
other powers of two: see include_server/basics.py.
-e, --email
Send email to 'distcc-pump-errors' or if defined, the value of
enviroment variable DISTCC_EMAILLOG_WHOM_TO_BLAME, when include
server gets in trouble. The default is to not send email.
--email_bound NUMBER
Maximal number of emails to send (in addition to a final email).
Default: 3.
--no-email
Do not send email. This is the default.
--path_observation_re=RE
Issue warning message whenever a filename is resolved to a real-
path that is matched by RE, which is a regular expression in
Python syntax. This is useful for finding out where files
included actually come from. Use RE="" to find them all. Note:
warnings must be enabled with at least -d1.
--pid_file FILEPATH
The pid of the include server is written to file FILEPATH. This
allows a script such a pump to tear down the include server.
-s, --statistics
Print information to stdout about include analysis.
--stat_reset_triggers=LIST
Flush stat caches when the timestamp of any filepath in LIST
changes or the filepath comes in or out of existence. LIST is a
colon separated string of filepaths, possibly containing simple
globs (as allowed by Python's glob module). Print a warning
whenever such a change happens (if warnings are enabled). This
option allows limited exceptions to distcc_pump's normal assump-
tion that source files are not modified during the build.
-t, --time
Print elapsed, user, and system time to stderr.
--unsafe_absolute_includes
Do preprocessing on the compilation server even if includes of
absolute filepaths are encountered. Normally the include-server
will fall back on local preprocessing if it detects any absolute
includes. Thus, this flag is useful for preventing such fall-
backs when the absolute includes are a false alarm, either
because the absolute include is discarded during preprocessing
or because the absolutely included file exists on the compila-
tion servers.
More precisely, with --unsafe_absolute_includes absolute
includes are ignored for the purposes of gathering the include
closure. Using this option may lead to incorrect results
because (1) the header may actually be included on the compila-
tion server and it may not be the same as on the client, (2) the
include directives of the header are not further analyzed.
The option is useful for compiling code that has such hardcoded
absolute locations of header files inside conditional directives
(e.g. "#ifdef") that render the includes irrelevant. More pre-
cisely, these includes must be eliminated during preprocessing
for the actual configuration. Then the question of existence of
the header file is moot and the remote compilation is sound.
This is often the case if such includes are meant for unusual
configurations different from the actual configuration.
-v, --verify
Verify that files in CPP closure are contained in closure calcu-
lated by include processor.
-w, --write_include_closure
Write a .d_approx file which lists all the included files calcu-
lated by the include server; with -x, additionally write the
included files as calculated by CPP to a .d_exact file.
-x, --exact_analysis
Use CPP instead, do not omit system headers files.
INCLUDE SERVER SYMPTOMS AND ISSUES
The most likely messages and warnings to come from the include proces-
sor are listed below.
Preprocessing locally. Include server not covering: Couldn't determine
default system include directories
To determine the default system header directories, the include
server runs the compiler once for each language needed during
its session. This message indicates that the compiler specified
to distcc is not present on the client.
Preprocessing locally. Include server not covering: Bailing out because
include server spent more than ...s user time handling request
In uncommon situations, the include server fails to analyze very
complicated macro expressions. The distcc client will use plain
distcc mode.
Warning: Filepath must be relative but isn't
The include server does not accept absolute filepaths, such as
/usr/include/stdio.h, in include directives, because there is no
guarantee that this header on the compilation server machine
will be the same as that on the client. The include server
gives up analyzing the include closure. The distcc client cannot
use pump-mode.
To overcome this problem in a not always reliable way, set the
environment variable INCLUDE_SERVER_ARGS='--unsafe_abso-
lute_includes' when invoking the pump script to pass the
--unsafe_absolute_includes option to the include server.
Warning: Absolute filepath ... was IGNORED
The --unsafe_absolute_includes is in use. This situation hap-
pens under the same circumstances as when "Filepath must be rel-
ative but isn't" is issued, but in this case the include will
provide an answer to the distcc client.
Warning: Path '/PATH/FILE' changed/came into existence/no longer exists
These warnings are issued when using stat reset triggers.
Because /PATH/FILE changed, the include server clears its
caches; the new version of the file (or the lack of it) renders
the include analysis invalid. This message can usually be
ignored; it does signify a somewhat precarious use of files by
the build system. It is recommended to fix the build system so
that files are not rewritten.
Warning: For translation unit ..., lookup of file ... resolved to ...
whose realpath is ...
This warning occurs with --path_observation_re when a new real-
path matching a source or header file is observed.
DISTCC DISCREPANCY SYMPTOMS
The interactions between the build system, distcc, and the include
server is somewhat complex. When a distcc commands receives a failing
compilation from the remote server it retries the compilation locally.
This section discusses the causes of discrepancies between remote and
local compilation. These are flagged by the demotion message:
__________Warning: ... pump-mode compilation(s) failed on server, but
succeeded locally.
__________Distcc-pump was demoted to plain mode. See the Distcc Dis-
crepancy Symptoms section in the include_server(1) man page.
The pump script issues this message at the end of the build. This means
that for at least one distcc invocation a local compilation succeeded
after the remote compilation failed. Each distcc invocation for which
such a discrepancy occurred in turn also issues a message such as:
Warning: remote compilation of '...' failed, retried locally and got a
different result.
The demotion makes subsequent distcc invocations use plain distcc mode.
Thus preprocessing will take place on the local machine for the remain-
der of the build. This technique prevents very slow builds where all
compilations end up on the local machine after failing remotely.
Of course, if the local compilations fails after the remote failures,
then the distcc invocation exits with the non-zero status of the local
compilation. The error messages printed are also those of the local
compilation.
The fallback behavior for distcc-pump mode to local compilation can be
disabled by setting the environment variable DISTCC_FALLBACK to 1,
which makes the distcc command fail as soon as the remote compilation
has failed. This setting is very useful for debugging why the remote
compilation went wrong, because now the output from the server will be
printed.
Next we discuss the possible causes of discrepancies.
The user changed a source or header file during the build.
This yields inconsistent results of course.
A source or header file changed during the build.
The build system rewrites a file. For Linux kernel 2.6, this
happens for 'include/linux/compile.h' and 'include/asm/asm-off-
sets.h'. This condition is fixed by letting the include server
know that it must reset its caches when a stat of any of the
files changes. Practically, this is done by gathering the files
in a colon-separated list and then setting the
INCLUDE_SERVER_ARGS command as in:
include_server_args="--stat_reset_triggers=include/linux/com-
pile.h:include/asm/asm-offsets.h"
A header file is potentially included, but does not exist, and is then
later included.
This occurs when some header foo.h includes another header file
trick.h, but the trick.h file has not yet been generated and the
inclusion is actually ignored because of preprocessing direc-
tives. The include server will probe for the existence of
trick.h, because it overapproximates all possible ways direc-
tives actually evaluate. The file trick.h is determined not to
exist. If it is later generated, and then really included, then
the include server will falsely believe that the file still does
not exist. The solution to this problem is to make the build
system generate trick.h before the first time any header file is
included that makes a syntactic reference to trick.h
The include server was started with --unsafe_absolute_includes.
This is a problem if there are header files locally that do not
exist remotely and that are actually used. Such includes are
often protected by conditional directives that evaluate so that
are actually used on only specific and often uncommon platforms.
If you are not compiling for such a platform, then it may be
correct to use --unsafe_absolute_include.
The include server has calculated the wrong includes.
We do not know of such a situation.
EXIT CODES
The exit code of include_server.py is usually 0. That the include
server has been started properly is communicated through the existence
of the pid_file.
ENVIRONMENT VARIABLES
DISTCC_EMAILLOG_WHOM_TO_BLAME The email address to use for include
server automated emails. The default is 'distcc-pump-errors' (which is
an email address that probably will not exist in your domain).
Additionally, the invocation of the compiler may use additional envi-
ronment variables.
BUGS
If you think you have found a distcc bug, please see the file report-
ing-bugs.txt in the documentation directory for information on how to
report it.
In distcc-pump mode, the include server is unable to handle certain
very complicated computed includes as found in parts of the Boost
library. The include server will time out and distcc will revert to
plain mode.
Other known bugs may be documented on http://code.google.com/p/distcc/
AUTHOR
The include server was written by Nils Klarlund, with assistance from
Fergus Henderson, Manos Renieris, and Craig Silverstein. Please report
bugs to <distcc@lists.samba.org>.
LICENCE
You are free to use distcc. distcc (including this manual) may be
copied, modified or distributed only under the terms of the GNU General
Public Licence version 2 or later. distcc comes with absolutely no
warrany. A copy of the GPL is included in the file COPYING.
SEE ALSO
include_server(1), and gcc(1).
http://code.google.com/p/distcc/ http://ccache.samba.org/
9 June 2008 include_server(1)
Xcode 4.2 - Generated Tue Nov 22 06:21:33 CST 2011