manpagez: man pages & more
man dvisvgm(1)
Home | html | info | man
dvisvgm(1)                      dvisvgm Manual                      dvisvgm(1)




NAME

       dvisvgm - converts DVI and EPS files to the XML-based SVG format


SYNOPSIS

       dvisvgm [ options ] file [.dvi]

       dvisvgm --eps [ options ] file [.eps]

       dvisvgm --pdf [ options ] file [.pdf]


DESCRIPTION

       The command-line utility dvisvgm converts DVI files, as generated by
       TeX/LaTeX, to the XML-based scalable vector graphics format SVG. It
       supports the classic DVI version 2 as well as version 3 (created by
       pTeX in vertical mode), and the XeTeX versions 5 to 7 which are also
       known as XDV. Besides the basic DVI commands, dvisvgm also evaluates
       many so-called specials which heavily extend the capabilities of the
       plain DVI format. For a more detailed overview, see section Supported
       Specials below.

       Since the current SVG standard 1.1 doesn't specify multi-page graphics,
       dvisvgm creates separate SVG files for each DVI page. Because of
       compatibility reasons, only the first page is converted by default. In
       order to select a different page or arbitrary page sequences, use
       option -p which is described below.

       SVG is a vector-based graphics format and therefore dvisvgm tries to
       convert the glyph outlines of all fonts referenced in a DVI page
       section to scalable path descriptions. The fastest way to achieve this
       is to extract the path information from vector-based font files
       available in PFB, TTF, or OTF format. If dvisvgm is able to find such a
       file, it extracts all necessary outline information about the glyphs
       from it.

       However, TeX's main source for font descriptions is Metafont, which
       produces bitmap output (GF files). That's why not all obtainable TeX
       fonts are available in a scalable format. In these cases, dvisvgm tries
       to vectorize Metafont's output by tracing the glyph bitmaps. The
       results are not as perfect as most (manually optimized) PFB or OTF
       counterparts, but are nonetheless really nice in most cases.

       When running dvisvgm without option --no-fonts, it creates font
       elements (<font>...</font>) to embed the font data into the SVG files.
       Unfortunately, only few SVG renderers support these elements yet. Most
       web browsers and vector graphics applications don't evaluate them
       properly so that the text components of the resulting graphics might
       look strange. In order to create more compatible SVG files,
       command-line option --no-fonts can be given to replace the font
       elements by plain graphics paths.


OPTIONS

       dvisvgm provides a POSIX-compliant command-line interface with short
       and long option names. They may be given before and/or after the name
       of the file to be converted. Also, the order of specifying the options
       is not significant, i.e. you can add them in any order without changing
       dvisvgm's behavior. Certain options accept or require additional
       parameters which are directly appended to or separated by whitespace
       from a short option (e.g. -v0 or -v 0). Long options require an
       additional equals sign (=) between option name and argument but without
       any surrounding whitespace (e.g. --verbosity=0). Multiple short options
       that don't expect a further parameter can be combined after a single
       dash (e.g. -ejs rather than -e -j -s).

       -b, --bbox=fmt
           Sets the bounding box of the generated graphic to the specified
           format. The parameter fmt takes either one of the format specifiers
           listed below, or a sequence of four comma- or whitespace-separated
           length values x1, y1, x2 and y2. The latter define the absolute
           coordinates of two diagonal corners of the bounding box. Each
           length value consists of a floating point number and an optional
           length unit (pt, bp, cm, mm, in, pc, dd, cc, or sp). If the unit is
           omitted, TeX points (pt) are assumed.

           It's also possible to give only one length value l. In this case,
           the minimal bounding box is computed and enlarged by adding (-l,-l)
           to the upper left and (l,l) to the lower right corner.

           Additionally, dvisvgm also supports the following format
           specifiers:

           International DIN/ISO paper sizes
               An, Bn, Cn, Dn, where n is a non-negative integer, e.g. A4 or
               a4 for DIN/ISO A4 format (210mm x 297mm).

           North American paper sizes
               invoice, executive, legal, letter, ledger

           Special bounding box sizes

               dvi         page size stored in the
                           DVI file
               min         computes the
                           minimal/tightest bounding
                           box
               none        no bounding box is
                           assigned
               papersize   box sizes specified by
                           papersize specials present
                           in the DVI file
               preview     bounding box data computed
                           by the preview package (if
                           present in the DVI file)


           Page orientation
               The default page orientation for DIN/ISO and American paper
               sizes is portrait, i.e.  width < height. Appending -landscape
               or simply -l to the format string switches to landscape mode
               (width > height). For symmetry reasons you can also explicitly
               add -portrait or -p to indicate the default portrait format.
               Note that these suffixes are part of the size string and not
               separate options. Thus, they must directly follow the size
               specifier without additional blanks. Furthermore, the
               orientation suffixes can't be used with dvi, min, and none.

                   Note
                   Option -b, --bbox only affects the bounding box and does
                   not transform the page content. Hence, if you choose a
                   landscape format, the page won't be rotated.

       -C, --cache[=dir]
           To speed up the conversion process of bitmap fonts, dvisvgm saves
           intermediate conversion information in cache files. By default,
           these files are stored in $HOME/.dvisvgm/cache. If you prefer a
           different location, use option --cache to overwrite the default.
           Furthermore, it is also possible to disable the font caching
           mechanism completely with option --cache=none. If argument dir is
           omitted, dvisvgm prints the path of the default cache directory
           together with further information about the stored fonts.
           Additionally, outdated and corrupted cache files are removed.

       -j, --clipjoin
           This option tells dvisvgm to compute all intersections of clipping
           paths itself rather than delegating this task to the SVG renderer.
           The resulting SVG files are more portable because some SVG viewers
           don't support intersecting clipping paths which are defined by
           clipPath elements containing a clip-path attribute.

       --color
           Enables colorization of messages printed during the conversion
           process. The colors can be customized via environment variable
           DVISVGM_COLORS. See the Environment section below for further
           information.

       --colornames
           By default, dvisvgm exclusively uses RGB values of the form #RRGGBB
           or #RGB to represent colors in the SVG file. The latter is a short
           form for colors whose RGB components each consist of two identical
           hex digits, e.g.  #123 equals #112233. According to the SVG
           standard, it's also possible to use color names (like black and
           darkblue) for a limited number of predefined colors. In order to
           apply these color names rather than their RGB values, call dvisvgm
           with option --colornames. All colors without an SVG color name will
           still be represented by RGB values.

       --comments
           Adds comments with further information about selected data to the
           SVG file. Currently, only font elements and font CSS rules related
           to native fonts are annotated.

       -E, --eps
           If this option is given, dvisvgm does not expect a DVI but an EPS
           input file, and tries to convert it to SVG. In order to do so, a
           single psfile special command is created and forwarded to the
           PostScript special handler. This option is only available if
           dvisvgm was built with PostScript support enabled, and requires
           Ghostscript to be available. See option --libgs for further
           information.

       -e, --exact
           This option tells dvisvgm to compute the precise bounding box of
           each character. By default, the values stored in a font's TFM file
           are used to determine a glyph's extent. As these values are
           intended to implement optimal character placements and are not
           designed to represent the exact dimensions, they don't necessarily
           correspond with the bounds of the visual glyphs. Thus, width and/or
           height of some glyphs may be larger (or smaller) than the
           respective TFM values. As a result, this can lead to clipped
           characters at the bounds of the SVG graphics. With option --exact
           given, dvisvgm analyzes the actual shape of each character and
           derives a usually tight bounding box.

       -f, --font-format=format
           Selects the file format used to embed the font data into the SVG
           files. Following formats are supported: SVG (that's the default),
           TTF (TrueType), WOFF, and WOFF2 (Web Open Font Format version 1 and
           2). By default, dvisvgm creates unhinted fonts that might look bad
           on low-resolution devices. In order to improve the display quality,
           the generated TrueType, WOFF, or WOFF2 fonts can be autohinted. The
           autohinter is enabled by appending ,autohint or ,ah to the font
           format, e.g.  --font-format=woff,autohint or --font-format=woff,ah.

           Option --font-format is only available if dvisvgm was built with
           WOFF support enabled.

       -m, --fontmap=filenames
           Loads and evaluates a single font map file or a sequence of font
           map files. These files are required to resolve font file names and
           encodings. dvisvgm does not provide its own map files but tries to
           read available ones coming with dvips or dvipdfm. If option
           --fontmap is omitted, dvisvgm looks for the default map files
           ps2pk.map, pdftex.map, dvipdfm.map, and psfonts.map (in this
           order). Otherwise, the files as option arguments are evaluated in
           the given order. Multiple filenames must be separated by commas
           without leading and/or trailing whitespace. By default, redefined
           mappings do not replace previous ones. However, each filename can
           be preceded by an optional mode specifier (+, -, or =) to change
           this behavior:

           +mapfile
               Only those entries in the given map file that don't redefine a
               font mapping are applied, i.e. fonts already mapped keep
               untouched. That's also the default mode if no mode specifier is
               given.

           -mapfile
               Ensures that none of the font mappings defined in the given map
               file are used, i.e. previously defined mappings for the
               specified fonts are removed.

           =mapfile
               All mappings defined in the map file are applied. Previously
               defined settings for the same fonts are replaced.

               If the first filename in the filename sequence is preceded by a
               mode specifier, dvisvgm loads the default font map (see above)
               and applies the other map files afterwards. Otherwise, none of
               default map files will be loaded automatically.

               Examples: --fontmap=myfile1.map,+myfile2.map loads myfile1.map
               followed by myfile2.map where all redefinitions of myfile2.map
               are ignored.  --fontmap==myfile1.map,-myfile2.map loads the
               default map file followed by myfile1.map and myfile2.map where
               all redefinitions of myfile1.map replace previous entries.
               Afterwards, all definitions for the fonts given in myfile2.map
               are removed from the font map tree.

               For further information about the map file formats and the mode
               specifiers, see the manuals of dvips and dvipdfm.

       --grad-overlap
           Tells dvisvgm to create overlapping grid segments when
           approximating color gradient fills (also see option --grad-segments
           below). By default, adjacent segments don't overlap but only touch
           each other like separate tiles. However, this alignment can lead to
           visible gaps between the segments because the background color
           usually influences the color at the boundary of the segments if the
           SVG renderer uses anti-aliasing to create smooth contours. One way
           to avoid this and to create seamlessly touching color regions is to
           enlarge the segments so that they extent into the area of their
           right and bottom neighbors. Since the latter are drawn on top of
           the overlapping parts, the visible size of all segments keeps
           unchanged. Just the former gaps disappear as the background is now
           completely covered by the correct colors. Currently, dvisvgm
           computes the overlapping segments separately for each patch of the
           mesh (a patch mesh may consist of multiple patches of the same
           type). Therefore, there still might be visible gaps at the seam of
           two adjacent patches.

       --grad-segments=number
           Determines the maximal number of segments per column and row used
           to approximate gradient color fills. Since SVG 1.1 only supports a
           small subset of the shading algorithms available in PostScript,
           dvisvgm approximates some of them by subdividing the area to be
           filled into smaller, monochromatic segments. Each of these segments
           gets the average color of the region it covers. Thus, increasing
           the number of segments leads to smaller monochromatic areas and
           therefore a better approximation of the actual color gradient. As a
           drawback, more segments imply bigger SVG files because every
           segment is represented by a separate path element.

           Currently, dvisvgm supports free- and lattice-form triangular patch
           meshes as well as Coons and tensor-product patch meshes. They are
           approximated by subdividing the area of each patch into a nxn grid
           of smaller segments. The maximal number of segments per column and
           row can be changed with option --grad-segments.

       --grad-simplify=delta
           If the size of the segments created to approximate gradient color
           fills falls below the given delta value, dvisvgm reduces their
           level of detail. For example, Bezier curves are replaced by
           straight lines, and triangular segments are combined to tetragons.
           For a small delta, these simplifications are usually not noticeable
           but reduce the size of the generated SVG files significantly.

       -h, --help[=mode]
           Prints a short summary of all available command-line options. The
           optional mode parameter is an integer value between 0 and 2. It
           selects the display variant of the help text. Mode 0 lists all
           options divided into categories with section headers. This is also
           the default if dvisvgm is called without parameters. Mode 1 lists
           all options ordered by the short option names, while mode 2 sorts
           the lines by the long option names.

       --keep
           Disables the removal of temporary files as created by Metafont
           (usually .gf, .tfm, and .log files) or the TrueType/WOFF module.

       --libgs=filename
           This option is only available if the Ghostscript library is not
           directly linked to dvisvgm and if PostScript support was not
           completely disabled during compilation. In this case, dvisvgm tries
           to load the shared GS library dynamically during runtime. By
           default, it expects the library's name to be libgs.so.X (on
           Unix-like systems, where X is the ABI version of the library) or
           gsdll32.dll/gsdll64.dll (Windows). Option --libgs can be used to
           give a different name. Alternatively, it's also possible to set the
           GS library name by the environment variable LIBGS. The latter has
           less precedence than the command-line option, i.e. dvisvgm ignores
           variable LIBGS if --libgs is given.

       -L, --linkmark=style
           Selects the method how to mark hyperlinked areas. The style
           argument can take one of the values none, box, and line, where box
           is the default, i.e. a rectangle is drawn around the linked region
           if option --linkmark is omitted. Style argument line just draws the
           lower edge of the bounding rectangle, and none tells dvisvgm not to
           add any visible objects to hyperlinks. The lines and boxes get the
           current text color selected. In order to apply a different,
           constant color, a colon followed by a color specifier can be
           appended to the style string. A color specifier is either a
           hexadecimal RGB value of the form #RRGGBB, or a dvips color name
           (https://en.wikibooks.org/wiki/LaTeX/Colors#The_68_standard_colors_known_to_dvips).

           Moreover, argument style can take a single color specifier to
           highlight the linked region by a frameless box filled with that
           color. An optional second color specifier separated by a colon
           selects the frame color.

           Examples: box:red or box:#ff0000 draws red boxes around the linked
           areas.  yellow:blue creates yellow filled rectangles with blue
           frames.

       -l, --list-specials
           Prints a list of registered special handlers and exits. Each
           handler processes a set of special statements belonging to the same
           category. In most cases, the categories are identified by the
           prefix of the special statements. It's usually a leading string
           followed by a colon or a blank, e.g.  color or ps. The listed
           handler names, however, don't need to match these prefixes, e.g. if
           there is no common prefix or if functionality is split into
           separate handlers in order to allow to disable them separately with
           option --no-specials. All special statements not covered by one of
           the special handlers are silently ignored.

       -M, --mag=factor
           Sets the magnification factor applied in conjunction with Metafont
           calls prior tracing the glyphs. The larger this value, the better
           the tracing results. Nevertheless, large magnification values can
           cause Metafont arithmetic errors due to number overflows. So, use
           this option with care. The default setting usually produces nice
           results.

       --no-merge
           Puts every single character in a separate text element with
           corresponding x and y attributes. By default, new text or tspan
           elements are only created if a string starts at a location that
           differs from the regular position defined by the characters'
           advance values.

       --no-mktexmf
           Suppresses the generation of missing font files. If dvisvgm can't
           find a font file through the kpathsea lookup mechanism, it calls
           the external tools mktextfm or mktexmf. This option disables these
           calls.

       -n, --no-fonts[=variant]
           If this option is given, dvisvgm doesn't create SVG font elements
           but uses paths instead. The resulting SVG files tend to be larger
           but they are concurrently more compatible with most applications
           that don't support SVG fonts yet. The optional argument variant
           selects the method how to substitute fonts by paths. Variant 0
           creates path and use elements in order to avoid lengthy duplicates.
           Variant 1 creates path elements only. Option --no-fonts implies
           --no-styles.

       -c, --scale=sx[,sy]
           Scales the page content horizontally by sx and vertically by sy.
           This option is equivalent to -TSsx,sy.

       -S, --no-specials[=names]
           Disable processing of special commands embedded in the DVI file. If
           no further parameter is given, all specials are ignored. To disable
           a selected set of specials, an optional comma-separated list of
           names can be appended to this option. A name is the unique
           identifier referencing the intended special handler as listed by
           option --list-specials.

       --no-styles
           By default, dvisvgm creates CSS styles and class attributes to
           reference fonts. This variant is more compact than adding the
           complete font information to each text element over and over again.
           However, if you prefer direct font references, the default behavior
           can be disabled with option --no-styles.

       -o, --output=pattern
           Sets the pattern specifying the names of the generated SVG files.
           Parameter pattern is a string that may contain static character
           sequences as well as the variables %f, %p, %P, %hd, %ho, and %hc.
           %f expands to the base name of the DVI file, i.e. the filename
           without suffix, %p is the current page number, and %P the total
           number of pages in the DVI file. An optional number (0-9) given
           directly after the percent sign specifies the minimal number of
           digits to be written. If a particular value consists of less
           digits, the number is padded with leading zeros. Example: %3p
           enforces 3 digits for the current page number (001, 002, etc.).
           Without an explicit width specifier, %p gets the same number of
           digits as %P.

           If you need more control over the numbering, you can use arithmetic
           expressions as part of a pattern. The syntax is %(expr) where expr
           may contain additions, subtractions, multiplications, and integer
           divisions with common precedence. The variables p and P contain the
           current page number and the total number of pages, respectively.
           For example, --output="%f-%(p-1)" creates filenames where the
           numbering starts with 0 rather than 1.

           The variables %hX contain different hash values computed from the
           DVI page data and the options given on the command-line.  %hd and
           %hc are only set if option --page-hashes is present. Otherwise,
           it's empty. For further information, see the description of option
           --page-hashes below.

           The default pattern is %f-%p.svg if the DVI file consists of more
           than one page, and %f.svg otherwise. That means, a DVI file foo.dvi
           is converted to foo.svg if foo.dvi is a single-page document.
           Otherwise, multiple SVG files foo-01.svg, foo-02.svg, etc. are
           produced. In Windows environments, the percent sign indicates
           dereferenced environment variables, and must therefore be protected
           by a second percent sign, e.g.  --output=%%f-%%p.

       -p, --page=ranges
           This option selects the pages to be processed. Parameter ranges
           consists of a comma-separated list of single page numbers and/or
           page ranges. A page range is a pair of numbers separated by a
           hyphen, e.g. 5-12. Thus, a page sequence might look like this:
           2-4,6,9-12,15. It doesn't matter if a page is given more than once
           or if page ranges overlap. dvisvgm always extracts the page numbers
           in ascending order and converts them only once. In order to stay
           compatible with previous versions, the default page sequence is 1.
           dvisvgm therefore converts only the first page and not the whole
           document if option --page is omitted. Usually, page ranges consist
           of two numbers denoting the first and last page to be converted. If
           the conversion should start at page 1, or if it should continue up
           to the last DVI page, the first or second range number can be
           omitted, respectively. Example: --page=-10 converts all pages up to
           page 10, --page=10- converts all pages starting with page 10.
           Please consider that the page values don't refer to the page
           numbers printed on the corresponding page. Instead, the physical
           page count is expected, where the first page always gets number 1.

       -H, --page-hashes[=params]
           If this option is given, dvisvgm computes hash values of all pages
           to be processed. As long as the page contents don't change, the
           hash value of that page stays the same. This property can be used
           to determine whether a DVI page must be converted again or can be
           skipped in consecutive runs of dvisvgm. This is done by propagating
           the hash value to variable %hd which can be accessed in the output
           pattern (see option --output). By default, dvisvgm changes the
           output pattern to %f-%hd if option --page-hashes is given. As a
           result, all SVG file names contain the hash value instead of the
           page number. When calling dvisvgm again with option --page-hashes
           with the same output pattern, it checks the existence of the SVG
           file to be created and skips the conversion if it's already
           present. This also applies for consecutive calls of dvisvgm with
           different command-line parameters. If you want to force another
           conversion of a DVI file that hasn't changed, you must remove the
           corresponding SVG files beforehand or add the parameter replace
           (see below). If you manually set the output pattern to not contain
           a hash value, the conversion won't be skipped.

           Alternatively, the output pattern may contain the variables %ho and
           %hc.  %ho expands to a 32-bit hash representing the given
           command-line options that affect the generated SVG output, like
           --no-fonts and --precision. Different combinations of options and
           parameters lead to different hashes. Thus pattern %f-%hd-%ho
           creates filenames that change depending on the DVI data and the
           given command-line options. Variable %hc provides a combined hash
           computed from the DVI data and the command-line options. It has the
           same length as %hd.

           Since the page number isn't part of the file name by default,
           different DVI pages with identical contents get the same file name.
           Therefore, only the first one is converted while the others are
           skipped. To create separate files for each page, you can add the
           page number to the output pattern, e.g.  --output="%f-%p-%hc".

           By default, dvisvgm uses the XXH64 hash algorithm to compute the
           values provided through %hd and %hc. It's extremely fast, and a
           64-bit hash should be sufficient for most documents with an average
           size of pages. Alternatively, XXH32 and MD5 can be used as well.
           The desired algorithm is specified by argument params of option
           --page-hashes. It takes one of the strings MD5, XXH32, and XXH64,
           where the names can be given in lower case too, like
           --page-hashes=md5.

           Finally, option --page-hashes can take a second argument that must
           be separated by a comma. Currently, only the two parameters list
           and replace are evaluated, e.g.  --page-hashes=md5,list or
           --page-hashes=replace. When list is present, dvisvgm doesn't
           perform any conversion but just lists the hash values %hd and %hc
           of the pages specified by option --page. Parameter replace forces
           dvisvgm to convert a DVI page even if a file with the target name
           already exists.

       -P, --pdf
           If this option is given, dvisvgm does not expect a DVI but a PDF
           input file, and tries to convert it to SVG. Similar to the
           conversion of DVI files, only the first page is processed by
           default. Option --page can be used to select different pages, page
           ranges, and/or page sequences. The conversion is realized by
           creating a single pdffile special command which is forwarded to the
           PostScript special handler. Therefore, this option is only
           available if dvisvgm was built with PostScript support enabled, and
           requires Ghostscript to be accessible. See option --libgs for
           further information.

       -d, --precision=digits
           Specifies the maximal number of decimal places applied to
           floating-point attribute values. All attribute values written to
           the generated SVG file(s) are rounded accordingly. The parameter
           digits accepts integer values from 0 to 6, where 0 enables the
           automatic selection of significant decimal places. This is also the
           default value if dvisvgm is called without option --precision.

       --progress[=delay]
           Enables a simple progress indicator shown when time-consuming
           operations like PostScript specials are processed. The indicator
           doesn't appear before the given delay (in seconds) has elapsed. The
           default delay value is 0.5 seconds.

       -r, --rotate=angle
           Rotates the page content clockwise by angle degrees around the page
           center. This option is equivalent to -TRangle.

       -R, --relative
           SVG allows to define graphics paths by a sequence of absolute
           and/or relative path commands, i.e. each command expects either
           absolute coordinates or coordinates relative to the current drawing
           position. By default, dvisvgm creates paths made up of absolute
           commands. If option --relative is given, relative commands are
           created instead. This slightly reduces the size of the SVG files in
           most cases.

       --stdin
           Tells dvisvgm to read the DVI or EPS input data from stdin instead
           from a file. Alternatively to option --stdin, a single dash (-) can
           be given. The default name of the generated SVG file is stdin.svg
           which can be changed with option --output.

       -s, --stdout
           Don't write the SVG output to a file but redirect it to stdout.

       --tmpdir[=path]
           In some cases, dvisvgm needs to create temporary files to work
           properly. These files go to the system's temporary folder by
           default, e.g.  /tmp on Linux systems. Option --tmpdir allows to
           specify a different location if necessary for some reason. Please
           note that dvisvgm does not create this folder, so you must ensure
           that it actually exists before running dvisvgm.

           If the optional parameter path is omitted, dvisvgm prints the
           location of the system's temp folder and exits.

       -a, --trace-all=[retrace]
           This option forces dvisvgm to vectorize not only the glyphs
           actually required to render the SVG file correctly - which is the
           default -, but processes all glyphs of all fonts referenced in the
           DVI file. Because dvisvgm stores the tracing results in a font
           cache, all following conversions of these fonts will speed up
           significantly. The boolean option retrace determines how to handle
           glyphs already stored in the cache. By default, these glyphs are
           skipped. Setting argument retrace to yes or true forces dvisvgm to
           retrace the corresponding bitmaps again.

               Note
               This option only takes effect if font caching is active.
               Therefore, --trace-all cannot be combined with option
               --cache=none.

       -T, --transform=commands
           Applies a sequence of transformations to the SVG content. Each
           transformation is described by a command beginning with a capital
           letter followed by a list of comma-separated parameters. Following
           transformation commands are supported:

           T tx[,ty]
               Translates (moves/shifts) the page in direction of vector
               (tx,ty). If ty is omitted, ty=0 is assumed. The expected unit
               length of tx and ty are TeX points (1pt = 1/72.27in). However,
               there are several constants defined to simplify the unit
               conversion (see below).

           S sx[,sy]
               Scales the page horizontally by sx and vertically by sy. If sy
               is omitted, sy=sx is assumed.

           R angle[,x,y]
               Rotates the page clockwise by angle degrees around point (x,y).
               If the optional arguments x and y are omitted, the page will be
               rotated around its center depending on the chosen page format.
               When option -bnone is given, the rotation center is origin
               (0,0).

           KX angle
               Skews the page along the x-axis by angle degrees. Argument
               angle can take any value except 90+180k, where k is an integer.

           KY angle
               Skews the page along the y-axis by angle degrees. Argument
               angle can take any value except 90+180k, where k is an integer.

           FH [y]
               Mirrors (flips) the page at the horizontal line through point
               (0,y). Omitting the optional argument leads to y=h/2, where h
               denotes the page height (see pre-defined constants below).

           FV [x]
               Mirrors (flips) the page at the vertical line through point
               (x,0). Omitting the optional argument leads to x=w/2, where w
               denotes the page width (see pre-defined constants below).

           M m1,...,m6
               Applies a transformation described by the 33 matrix
               ((m1,m2,m3),(m4,m5,m6),(0,0,1)), where the inner triples denote
               the rows.

                   Note
                   All transformation commands of option -T, --transform are
                   applied in the order of their appearance. Multiple commands
                   can optionally be separated by spaces. In this case the
                   whole transformation string has to be enclosed in double
                   quotes to keep them together. All parameters are
                   expressions of floating point type. You can either give
                   plain numbers or arithmetic terms combined by the operators
                   + (addition), - (subtraction), * (multiplication), /
                   (division) or % (modulo) with common associativity and
                   precedence rules. Parentheses may be used as well.

                   Additionally, some pre-defined constants are provided:

                   ux   horizontal position of
                        upper left page corner in
                        TeX point units
                   uy   vertical position of upper
                        left page corner in TeX
                        point units
                   h    page height in TeX point
                        units (0 in case of
                        -bnone)
                   w    page width in TeX point
                        units (0 in case of
                        -bnone)

                   Furthermore, you can use the 9 length constants pt, bp, cm,
                   mm, in, pc, dd, cc, and sp, e.g.  2cm or 1.6in. Thus,
                   option -TT1in,0R45 moves the page content 1 inch to the
                   right and rotates it by 45 degrees around the page center
                   afterwards.

                   For single transformations, there are also the short-hand
                   options -c, -t and -r available. In contrast to the
                   --transform commands, the order of these options is not
                   significant, so that it's not possible to describe
                   transformation sequences with them.

       -t, --translate=tx[,ty]
           Translates (moves) the page content in direction of vector (tx,ty).
           This option is equivalent to -TTtx,ty.

       -v, --verbosity=level
           Controls the type of messages printed during a dvisvgm run:

           0   no message output at all
           1   error messages only
           2   warning messages only
           4   informational messages
               only


               Note
               By adding these values you can combine the categories. The
               default level is 7, i.e. all messages are printed.

       -V, --version[=extended]
           Prints the version of dvisvgm and exits. If the optional argument
           is set to yes, the version numbers of the linked libraries are
           printed as well.

       -z, --zip[=level]
           Creates a compressed SVG file with suffix .svgz. The optional
           argument specifies the compression level. Valid values are in the
           range of 1 to 9 (default value is 9). Larger values cause better
           compression results but may take slightly more computation time.

       -Z, --zoom=factor
           Multiplies the values of the width and height attributes of the SVG
           root element by argument factor while the coordinate system of the
           graphic content is retained. As a result, most SVG viewers zoom the
           graphics accordingly. If a negative zoom factor is given, the width
           and height attributes are omitted.


SUPPORTED SPECIALS

       dvisvgm supports several sets of special commands that can be used to
       enrich DVI files with additional features, like color, graphics, and
       hyperlinks. The evaluation of special commands is delegated to
       dedicated handlers provided by dvisvgm. Each handler is responsible for
       all special statements of the same command set, i.e. commands beginning
       with the same prefix. To get a list of the actually provided special
       handlers, use option --list-specials (see above). This section gives an
       overview of the special commands currently supported.

       bgcolor
           Special statement for changing the background/page color. Since SVG
           1.1 doesn't support background colors, dvisvgm inserts a rectangle
           of the chosen color into the generated SVG document. This rectangle
           always gets the same size as the selected or computed bounding box.
           This background color command is part of the color special set but
           is handled separately in order to let the user turn it off. For an
           overview of the command syntax, see the documentation of dvips, for
           instance.

       color
           Statements of this command set provide instructions to change the
           text/paint color. For an overview of the exact syntax, see the
           documentation of dvips, for instance.

       dvisvgm
           dvisvgm offers its own small set of specials. The following list
           gives a brief overview.

           dvisvgm:raw text
               Adds an arbitrary sequence of characters to the page section of
               the SVG document. dvisvgm does not perform any validation here,
               thus the user has to ensure that the resulting SVG is still
               valid. Parameter text may contain the expressions {?x}, {?y},
               and {?color} that expand to the current x or y coordinate and
               the current color, respectively. Furthermore, {?nl} expands to
               a newline character.

           dvisvgm:rawdef text
               This command is similar to dvisvgm:raw, but puts the raw text
               into the <defs> section of the SVG document currently being
               generated.

           dvisvgm:rawset name ... dvisvgm:endrawset
               This pair of specials marks the begin and end of a definition
               of a named raw SVG fragment. All dvisvgm:raw and dvisvgm:rawdef
               specials enclosed by dvisvgm:rawset and dvisvgm:endrawset are
               not evaluated immediately but jointly stored under the given
               name for later use. Once defined, the named fragment can be
               referenced throughout the DVI file by dvisvgm:rawput (see
               below). The two commands dvisvgm:rawset and dvisvgm:endrawset
               must not be nested, i.e. each call of dvisvgm:rawset has to be
               followed by a corresponding call of dvisvgm:endrawset before
               another dvisvgm:rawset may occur. Also, the identifier name
               must be unique throughout the DVI file. Using dvisvgm:rawset
               multiple times together with the same name leads to warning
               messages.

           dvisvgm:rawput name
               Inserts raw SVG fragments previously stored under the given
               name. dvisvgm distinguishes between fragments that were
               specified with dvisvgm:raw or dvisvgm:rawdef, and handles them
               differently: It inserts all dvisvgm:raw parts every time
               dvisvgm:rawput is called, whereas the dvisvgm:rawdef portions
               go to the <defs> section of the current SVG document only once.

           dvisvgm:img width height file
               Creates an image element at the current graphic position
               referencing the given file. JPEG, PNG, and SVG images can be
               used here. However, dvisvgm does not check the file format or
               the file name suffix. The lengths width and height can be given
               together with a unit specifier (see option --bbox) or as plain
               floating point numbers. In the latter case, TeX point units are
               assumed (1in = 72.27pt).

           dvisvgm:bbox n[ew] name
               Defines or resets a local bounding box called name. The name
               may consist of letters and digits. While processing a DVI page,
               dvisvgm continuously updates the (global) bounding box of the
               current page in order to determine the minimal rectangle
               containing all visible page components (characters, images,
               drawing elements etc.) Additionally to the global bounding box,
               the user can request an arbitrary number of named local
               bounding boxes. Once defined, these boxes are updated together
               with the global bounding box starting with the first character
               that follows the definition. Thus, the local boxes can be used
               to compute the extent of parts of the page. This is useful for
               scenarios where the generated SVG file is post-processed. In
               conjunction with special dvisvgm:raw, the macro {?bbox name}
               expands to the four values x, y, w, and h (separated by spaces)
               specifying the coordinates of the upper left corner, width, and
               height of the local box name. If box name wasn't previously
               defined, all four values equal to zero.

           dvisvgm:bbox width height [depth]
               Updates the bounding box of the current page by embedding a
               virtual rectangle (x, y, width, height) where the lower left
               corner is located at the current DVI drawing position (x,y). If
               the optional parameter depth is specified, dvisvgm embeds a
               second rectangle (x, y, width, -depth). The lengths width,
               height, and depth can be given together with a unit specifier
               (see option --bbox) or as plain floating point numbers. In the
               latter case, TeX point units are assumed (1in = 72.27pt).
               Depending on size and position of the virtual rectangle, this
               command either enlarges the overall bounding box or leaves it
               as is. It's not possible to reduce its extent. This special
               should be used together with dvisvgm:raw in order to update the
               viewport of the page properly.

           dvisvgm:bbox a[bs] x1 y1 x2 y2
               This variant of the bbox special updates the bounding box by
               embedding a virtual rectangle (x1,y1,x2,y2). The points (x1,y1)
               and (x2,y2) denote the absolute coordinates of two diagonal
               corners of the rectangle.

           dvisvgm:bbox f[ix] x1 y1 x2 y2
               This variant of the bbox special assigns an absolute (final)
               bounding box to the resulting SVG. After executing this
               command, dvisvgm doesn't further alter the bounding box
               coordinates, except this special is called again later. The
               points (x1,y1) and (x2,y2) denote the absolute coordinates of
               two diagonal corners of the rectangle.

               The following TeX snippet adds two raw SVG elements to the
               output and updates the bounding box accordingly:

                   \special{dvisvgm:raw <circle cx='{?x}' cy='{?y}' r='10' stroke='black' fill='red'/>}%
                   \special{dvisvgm:bbox 10bp 10bp 10bp}%
                   \special{dvisvgm:bbox -10bp 10bp 10bp}

                   \special{dvisvgm:raw <path d='M50 200 L10 250 H100 Z' stroke='black' fill='blue'/>}
                   \special{dvisvgm:bbox abs 10bp 200bp 100bp 250bp}

       em
           These specials were introduced with the emTeX distribution by
           Eberhard Mattes. They provide line drawing statements, instructions
           for embedding MSP, PCX, and BMP image files, as well as two PCL
           commands. dvisvgm supports only the line drawing statements and
           ignores all other em specials silently. A description of the
           command syntax can be found in the DVI driver documentation coming
           with emTeX (https://ctan.org/pkg/emtex).

       html
           The hyperref specification defines several variants on how to mark
           hyperlinked areas in a DVI file. dvisvgm supports the plain
           HyperTeX special constructs as created with hyperref package option
           hypertex. By default, all linked areas of the document are marked
           by a rectangle. Option --linkmark allows to change this behavior.
           See above for further details. Information on syntax and semantics
           of the HyperTeX specials can be found in the hyperref manual
           (https://ctan.org/pkg/hyperref).

       papersize
           The papersize special, which is an extension introduced by dvips,
           can be used to specify the widths and heights of the pages in the
           DVI file. It affects the page it appears on as well as all
           following pages until another papersize special is found. If there
           is more than one papersize special present on a page, dvisvgm
           applies the last one. However, in order to stay compatible with
           previous versions of dvisvgm that did not evaluate these specials,
           their processing must be explicitly enabled by adding option
           --bbox=papersize on the command-line. Otherwise, dvisvgm ignores
           them and computes tight bounding boxes.

       pdf
           pdfTeX and dvipdfmx introduced several special commands related to
           the generation of PDF files. Currently, only pdf:mapfile,
           pdf:mapline, pdf:pagesize, and PDF hyperlink specials are supported
           by dvisvgm. The latter are the PDF pendants to the HTML HyperTeX
           specials generated by the hyperref package in PDF mode.

           pdf:pagesize is similar to the papersize special (see above) which
           specifies the size of the current and all folowing pages. In order
           to actually apply the extents to the generated SVG files, option
           --bbox=papersize must be given.

           pdf:mapfile and pdf:mapline allow for modifying the font map tree
           while processing the DVI file. They are used by CTeX, for example.
           dvisvgm supports both, the dvips and dvipdfm font map format. For
           further information on the command syntax and semantics, see the
           documentation of \pdfmapfile in the pdfTeX user manual
           (https://ctan.org/pkg/pdftex).

       ps
           The famous DVI driver dvips introduced its own set of specials in
           order to embed PostScript code into DVI files, which greatly
           improves the capabilities of DVI documents. One aim of dvisvgm is
           to completely evaluate all PostScript snippets and to convert as
           many of them as possible to SVG. In contrast to dvips, dvisvgm uses
           floating point arithmetics to compute the precise position of each
           graphic element, i.e. it doesn't round the coordinates. Therefore,
           the relative locations of the graphic elements may slightly differ
           from those computed by dvips.

           Since PostScript is a rather complex language, dvisvgm does not
           implement its own PostScript interpreter but relies on Ghostscript
           (https://ghostscript.com) instead. If the Ghostscript library was
           not linked to the dvisvgm binary, it is looked up and loaded
           dynamically during runtime. In this case, dvisvgm looks for
           libgs.so.X on Unix-like systems (supported ABI versions: 7,8,9),
           for libgs.X.dylib on macOS, and for gsdll32.dll or gsdll64.dll on
           Windows. You can override the default file names with environment
           variable LIBGS or the command-line option --libgs. The library must
           be reachable through the ld search path (*nix) or the PATH
           environment variable (Windows). Alternatively, the absolute file
           path can be specified. If the library cannot be found, dvisvgm
           disables the processing of PostScript specials and prints a warning
           message. Use option --list-specials to check whether PostScript
           support is available, i.e. entry ps is present.

           The PostScript handler also recognizes and evaluates bounding box
           data generated by the preview package
           (https://ctan.org/pkg/preview) with option tightpage. If such data
           is present in the DVI file and if dvisvgm is called with option
           --bbox=preview, dvisvgm sets the width and total height of the SVG
           file to the values derived from the preview data. Additionally, it
           prints a message showing the width, height, and depth of the box in
           TeX point units to the console. Especially, the depth value can be
           read by a post-processor to vertically align the SVG graphics with
           the baseline of surrounding text in HTML or XSL-FO documents, for
           example. Please note that SVG bounding boxes are defined by a width
           and (total) height. In contrast to TeX, SVG provides no means to
           differentiate between height and depth, i.e. the vertical extents
           above and below the baseline, respectively. Therefore, it is
           generally not possible to retrieve the depth value from the SVG
           file itself.

           If you call dvisvgm with option --bbox=min (the default) and
           preview data is present in the DVI file, dvisvgm doesn't apply the
           preview extents but computes a bounding box that tightly encloses
           the page contents. The height, depth and width values written to
           console are adapted accordingly.

       tpic
           The TPIC special set defines instructions for drawing simple
           geometric objects. Some LaTeX packages, like eepic and tplot, use
           these specials to describe graphics.


EXAMPLES

           dvisvgm file

       Converts the first page of file.dvi to file.svg.

           dvisvgm - < file.dvi

       Converts the first page of file.dvi to stdin.svg where the contents of
       file.dvi is read from stdin.

           dvisvgm -z file

       Converts the first page of file.dvi to file.svgz with default
       compression level 9.

           dvisvgm -p5 -z3 -ba4-l -onewfile file

       Converts the fifth page of file.dvi to newfile.svgz with compression
       level 3. The bounding box is set to DIN/ISO A4 in landscape format.

           dvisvgm --transform="R20,w/3,2h/5 T1cm,1cm S2,3" file

       Converts the first page of file.dvi to file.svg where three
       transformations are applied.


ENVIRONMENT

       dvisvgm uses the kpathsea library for locating the files that it opens.
       Hence, the environment variables described in the library's
       documentation influence the converter.

       If dvisvgm was linked without the Ghostscript library, and if
       PostScript support has not been disabled, the shared Ghostscript
       library is looked up during runtime via dlopen(). The environment
       variable LIBGS can be used to specify path and file name of the
       library.

       The pre-compiled Windows versions of dvisvgm require a working
       installation of MiKTeX 2.9 or above. dvisvgm does not work together
       with the portable edition of MiKTeX because it relies on MiKTeX's COM
       interface that is only accessible in a local installation. To enable
       the evaluation of PostScript specials, the original Ghostscript DLL
       gsdll32.dll must be present and reachable through the search path.
       64-bit Windows builds require the 64-bit Ghostscript DLL gsdll64.dll.
       Both DLLs come with the corresponding Ghostscript installers available
       from https://ghostscript.com.

       The environment variable DVISVGM_COLORS specifies the colors used to
       highlight various parts of dvisvgm's message output. It is only
       evaluated if option --color is given. The value of DVISVGM_COLORS is a
       list of colon-separated entries of the form gg=BF, where gg denotes one
       of the color group indicators listed below, and BF are two hexadecimal
       digits specifying the background (first digit) and foreground/text
       color (second digit). The color values are defined as follows: 0=black,
       1=red, 2=green, 3=yellow, 4=blue, 5=magenta, 6=cyan, 7=gray, 8=bright
       red, 9=bright green, A=bright yellow, B=bright blue, C=bright magenta,
       D=bright cyan, E=bright gray, F=white. Depending on the terminal, the
       colors may differ. Rather than changing both the text and background
       color, it's also possible to change only one of them: An asterisk (*)
       in place of a hexadecimal digit indicates the default text or
       background color of the terminal.

       All malformed entries in the list are silently ignored.


       er   error messages

       wn   warning messages

       pn   messages about page
            numbers

       ps   page size messages

       fw   information about the
            files written

       sm   state messages

       tr   messages of the glyph
            tracer

       pi   progress indicator


       Example: er=01:pi=*5 sets the colors of error messages (er) to red (1)
       on black (0), and those of progress indicators (pi) to cyan (5) on
       default background (*).


FILES

       The location of the following files is determined by the kpathsea
       library. To check the actual kpathsea configuration you can use the
       kpsewhich utility.


       *.enc   Font encoding files

       *.fgd   Font glyph data files
               (cache files created by
               dvisvgm)

       *.map   Font map files

       *.mf    Metafont input files

       *.pfb   PostScript Type 1 font
               files

       *.pro   PostScript header/prologue
               files

       *.tfm   TeX font metric files


       *.ttf   TrueType font files

       *.vf    Virtual font files



SEE ALSO

       tex(1), mf(1), mktexmf(1), grodvi(1), potrace(1), and the kpathsea
       library info documentation.


RESOURCES

       Project home page
           https://dvisvgm.de

       Code repository
           https://github.com/mgieseki/dvisvgm


BUGS

       Please report bugs using the bug tracker at GitHub
       (https://github.com/mgieseki/dvisvgm/issues).


AUTHOR

       Written by Martin Gieseking <martin.gieseking@uos.de>


COPYING

       Copyright (C) 2005-2019 Martin Gieseking. Free use of this software is
       granted under the terms of the GNU General Public License (GPL) version
       3 or, (at your option) any later version.



dvisvgm 2.6.3                     03/09/2019                        dvisvgm(1)

texlive-bin-extra 50853 - Generated Fri Jun 7 16:28:43 CDT 2019
© manpagez.com 2000-2021
Individual documents may contain additional copyright information.