manpagez: man pages & more
info gawk
Home | html | info | man
[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4.1 How Input Is Split into Records

The awk utility divides the input for your awk program into records and fields. awk keeps track of the number of records that have been read so far from the current input file. This value is stored in a built-in variable called FNR. It is reset to zero when a new file is started. Another built-in variable, NR, records the total number of input records read so far from all data files. It starts at zero, but is never automatically reset to zero.

Records are separated by a character called the record separator. By default, the record separator is the newline character. This is why records are, by default, single lines. A different character can be used for the record separator by assigning the character to the built-in variable RS.

Like any other variable, the value of RS can be changed in the awk program with the assignment operator, ‘=’ (see section Assignment Expressions). The new record-separator character should be enclosed in quotation marks, which indicate a string constant. Often the right time to do this is at the beginning of execution, before any input is processed, so that the very first record is read with the proper separator. To do this, use the special BEGIN pattern (see section The BEGIN and END Special Patterns). For example:

awk 'BEGIN { RS = "/" }
     { print $0 }' BBS-list

changes the value of RS to "/", before reading any input. This is a string whose first character is a slash; as a result, records are separated by slashes. Then the input file is read, and the second rule in the awk program (the action with no pattern) prints each record. Because each print statement adds a newline at the end of its output, this awk program copies the input with each slash changed to a newline. Here are the results of running the program on ‘BBS-list’:

$ awk 'BEGIN { RS = "/" }
>      { print $0 }' BBS-list
-| aardvark     555-5553     1200
-| 300          B
-| alpo-net     555-3412     2400
-| 1200
-| 300     A
-| barfly       555-7685     1200
-| 300          A
-| bites        555-1675     2400
-| 1200
-| 300     A
-| camelot      555-0542     300               C
-| core         555-2912     1200
-| 300          C
-| fooey        555-1234     2400
-| 1200
-| 300     B
-| foot         555-6699     1200
-| 300          B
-| macfoo       555-6480     1200
-| 300          A
-| sdace        555-3430     2400
-| 1200
-| 300     A
-| sabafoo      555-2127     1200
-| 300          C
-|

Note that the entry for the ‘camelot’ BBS is not split. In the original data file (see section Data Files for the Examples), the line looks like this:

camelot      555-0542     300               C

It has one baud rate only, so there are no slashes in the record, unlike the others which have two or more baud rates. In fact, this record is treated as part of the record for the ‘core’ BBS; the newline separating them in the output is the original newline in the data file, not the one added by awk when it printed the record!

Another way to change the record separator is on the command line, using the variable-assignment feature (see section Other Command-Line Arguments):

awk '{ print $0 }' RS="/" BBS-list

This sets RS to ‘/’ before processing ‘BBS-list’.

Using an unusual character such as ‘/’ for the record separator produces correct behavior in the vast majority of cases. However, the following (extreme) pipeline prints a surprising ‘1’:

$ echo | awk 'BEGIN { RS = "a" } ; { print NF }'
-| 1

There is one field, consisting of a newline. The value of the built-in variable NF is the number of fields in the current record.

Reaching the end of an input file terminates the current input record, even if the last character in the file is not the character in RS. (d.c.)

The empty string "" (a string without any characters) has a special meaning as the value of RS. It means that records are separated by one or more blank lines and nothing else. See section Multiple-Line Records, for more details.

If you change the value of RS in the middle of an awk run, the new value is used to delimit subsequent records, but the record currently being processed, as well as records already processed, are not affected.

After the end of the record has been determined, gawk sets the variable RT to the text in the input that matched RS.

When using gawk, the value of RS is not limited to a one-character string. It can be any regular expression (see section Regular Expressions). (c.e.) In general, each record ends at the next string that matches the regular expression; the next record starts at the end of the matching string. This general rule is actually at work in the usual case, where RS contains just a newline: a record ends at the beginning of the next matching string (the next newline in the input), and the following record starts just after the end of this string (at the first character of the following line). The newline, because it matches RS, is not part of either record.

When RS is a single character, RT contains the same single character. However, when RS is a regular expression, RT contains the actual input text that matched the regular expression.

If the input file ended without any text that matches RS, gawk sets RT to the null string.

The following example illustrates both of these features. It sets RS equal to a regular expression that matches either a newline or a series of one or more uppercase letters with optional leading and/or trailing whitespace:

$ echo record 1 AAAA record 2 BBBB record 3 |
> gawk 'BEGIN { RS = "\n|( *[[:upper:]]+ *)" }
>             { print "Record =", $0, "and RT =", RT }'
-| Record = record 1 and RT =  AAAA
-| Record = record 2 and RT =  BBBB
-| Record = record 3 and RT =
-|

The final line of output has an extra blank line. This is because the value of RT is a newline, and the print statement supplies its own terminating newline. See section A Simple Stream Editor, for a more useful example of RS as a regexp and RT.

If you set RS to a regular expression that allows optional trailing text, such as ‘RS = "abc(XYZ)?"’ it is possible, due to implementation constraints, that gawk may match the leading part of the regular expression, but not the trailing part, particularly if the input text that could match the trailing part is fairly long. gawk attempts to avoid this problem, but currently, there’s no guarantee that this will never happen.

NOTE: Remember that in awk, the ‘^’ and ‘$’ anchor metacharacters match the beginning and end of a string, and not the beginning and end of a line. As a result, something like ‘RS = "^[[:upper:]]"’ can only match at the beginning of a file. This is because gawk views the input file as one long string that happens to contain newline characters in it. It is thus best to avoid anchor characters in the value of RS.

The use of RS as a regular expression and the RT variable are gawk extensions; they are not available in compatibility mode (see section Command-Line Options). In compatibility mode, only the first character of the value of RS is used to determine the end of the record.

Advanced Notes: RS = "\0" Is Not Portable

There are times when you might want to treat an entire data file as a single record. The only way to make this happen is to give RS a value that you know doesn’t occur in the input file. This is hard to do in a general way, such that a program always works for arbitrary input files.

You might think that for text files, the NUL character, which consists of a character with all bits equal to zero, is a good value to use for RS in this case:

BEGIN { RS = "\0" }  # whole file becomes one record?

gawk in fact accepts this, and uses the NUL character for the record separator. However, this usage is not portable to other awk implementations.

All other awk implementations(19) store strings internally as C-style strings. C strings use the NUL character as the string terminator. In effect, this means that ‘RS = "\0"’ is the same as ‘RS = ""’. (d.c.)

The best way to treat a whole file as a single record is to simply read the file in, one record at a time, concatenating each record onto the end of the previous ones.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

This document was generated on March 30, 2012 using texi2html 5.0.