manpagez: man pages & more
info flex
Home | html | info | man
[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.4 Options for Scanner Speed and Size

-C[aefFmr]

controls the degree of table compression and, more generally, trade-offs between small scanners and fast scanners.

-C

A lone ‘-C’ specifies that the scanner tables should be compressed but neither equivalence classes nor meta-equivalence classes should be used.

-Ca, --align, %option align

(“align”) instructs flex to trade off larger tables in the generated scanner for faster performance because the elements of the tables are better aligned for memory access and computation. On some RISC architectures, fetching and manipulating longwords is more efficient than with smaller-sized units such as shortwords. This option can quadruple the size of the tables used by your scanner.

-Ce, --ecs, %option ecs

directs flex to construct equivalence classes, i.e., sets of characters which have identical lexical properties (for example, if the only appearance of digits in the flex input is in the character class “[0-9]” then the digits ’0’, ’1’, ..., ’9’ will all be put in the same equivalence class). Equivalence classes usually give dramatic reductions in the final table/object file sizes (typically a factor of 2-5) and are pretty cheap performance-wise (one array look-up per character scanned).

-Cf

specifies that the full scanner tables should be generated - flex should not compress the tables by taking advantages of similar transition functions for different states.

-CF

specifies that the alternate fast scanner representation (described above under the ‘--fast’ flag) should be used. This option cannot be used with ‘--c++’.

-Cm, --meta-ecs, %option meta-ecs

directs flex to construct meta-equivalence classes, which are sets of equivalence classes (or characters, if equivalence classes are not being used) that are commonly used together. Meta-equivalence classes are often a big win when using compressed tables, but they have a moderate performance impact (one or two if tests and one array look-up per character scanned).

-Cr, --read, %option read

causes the generated scanner to bypass use of the standard I/O library (stdio) for input. Instead of calling fread() or getc(), the scanner will use the read() system call, resulting in a performance gain which varies from system to system, but in general is probably negligible unless you are also using ‘-Cf’ or ‘-CF’. Using ‘-Cr’ can cause strange behavior if, for example, you read from ‘yyin’ using stdio prior to calling the scanner (because the scanner will miss whatever text your previous reads left in the stdio input buffer). ‘-Cr’ has no effect if you define YY_INPUT() (see section The Generated Scanner).

The options ‘-Cf’ or ‘-CF’ and ‘-Cm’ do not make sense together - there is no opportunity for meta-equivalence classes if the table is not being compressed. Otherwise the options may be freely mixed, and are cumulative.

The default setting is ‘-Cem’, which specifies that flex should generate equivalence classes and meta-equivalence classes. This setting provides the highest degree of table compression. You can trade off faster-executing scanners at the cost of larger tables with the following generally being true:

    slowest & smallest
          -Cem
          -Cm
          -Ce
          -C
          -C{f,F}e
          -C{f,F}
          -C{f,F}a
    fastest & largest

Note that scanners with the smallest tables are usually generated and compiled the quickest, so during development you will usually want to use the default, maximal compression.

-Cfe’ is often a good compromise between speed and size for production scanners.

-f, --full, %option full

specifies fast scanner. No table compression is done and stdio is bypassed. The result is large but fast. This option is equivalent to ‘--Cfr

-F, --fast, %option fast

specifies that the fast scanner table representation should be used (and stdio bypassed). This representation is about as fast as the full table representation ‘--full’, and for some sets of patterns will be considerably smaller (and for others, larger). In general, if the pattern set contains both keywords and a catch-all, identifier rule, such as in the set:

    "case"    return TOK_CASE;
    "switch"  return TOK_SWITCH;
    ...
    "default" return TOK_DEFAULT;
    [a-z]+    return TOK_ID;

then you’re better off using the full table representation. If only the identifier rule is present and you then use a hash table or some such to detect the keywords, you’re better off using ‘--fast’.

This option is equivalent to ‘-CFr’. It cannot be used with ‘--c++’.


[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

This document was generated on August 12, 2012 using texi2html 5.0.

© manpagez.com 2000-2017
Individual documents may contain additional copyright information.