manpagez: man pages & more
info flex
Home | html | info | man
[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

10 Start Conditions

flex provides a mechanism for conditionally activating rules. Any rule whose pattern is prefixed with ‘<sc>’ will only be active when the scanner is in the start condition named sc. For example,

    <STRING>[^"]*        { /* eat up the string body ... */

will be active only when the scanner is in the STRING start condition, and

    <INITIAL,STRING,QUOTE>\.        { /* handle an escape ... */

will be active only when the current start condition is either INITIAL, STRING, or QUOTE.

Start conditions are declared in the definitions (first) section of the input using unindented lines beginning with either ‘%s’ or ‘%x’ followed by a list of names. The former declares inclusive start conditions, the latter exclusive start conditions. A start condition is activated using the BEGIN action. Until the next BEGIN action is executed, rules with the given start condition will be active and rules with other start conditions will be inactive. If the start condition is inclusive, then rules with no start conditions at all will also be active. If it is exclusive, then only rules qualified with the start condition will be active. A set of rules contingent on the same exclusive start condition describe a scanner which is independent of any of the other rules in the flex input. Because of this, exclusive start conditions make it easy to specify “mini-scanners” which scan portions of the input that are syntactically different from the rest (e.g., comments).

If the distinction between inclusive and exclusive start conditions is still a little vague, here’s a simple example illustrating the connection between the two. The set of rules:

    %s example

    <example>foo   do_something();

    bar            something_else();

is equivalent to

    %x example

    <example>foo   do_something();

    <INITIAL,example>bar    something_else();

Without the <INITIAL,example> qualifier, the bar pattern in the second example wouldn’t be active (i.e., couldn’t match) when in start condition example. If we just used <example> to qualify bar, though, then it would only be active in example and not in INITIAL, while in the first example it’s active in both, because in the first example the example start condition is an inclusive (%s) start condition.

Also note that the special start-condition specifier <*> matches every start condition. Thus, the above example could also have been written:

    %x example

    <example>foo   do_something();

    <*>bar    something_else();

The default rule (to ECHO any unmatched character) remains active in start conditions. It is equivalent to:

    <*>.|\n     ECHO;

BEGIN(0) returns to the original state where only the rules with no start conditions are active. This state can also be referred to as the start-condition INITIAL, so BEGIN(INITIAL) is equivalent to BEGIN(0). (The parentheses around the start condition name are not required but are considered good style.)

BEGIN actions can also be given as indented code at the beginning of the rules section. For example, the following will cause the scanner to enter the SPECIAL start condition whenever yylex() is called and the global variable enter_special is true:

            int enter_special;

    %x SPECIAL
            if ( enter_special )

    ...more rules follow...

To illustrate the uses of start conditions, here is a scanner which provides two different interpretations of a string like ‘123.456’. By default it will treat it as three tokens, the integer ‘123’, a dot (‘.’), and the integer ‘456’. But if the string is preceded earlier in the line by the string ‘expect-floats’ it will treat it as a single token, the floating-point number ‘123.456’:

    #include <math.h>
    %s expect

    expect-floats        BEGIN(expect);

    <expect>[0-9]+.[0-9]+      {
                printf( "found a float, = %f\n",
                        atof( yytext ) );
    <expect>\n           {
                /* that's the end of the line, so
                 * we need another "expect-number"
                 * before we'll recognize any more
                 * numbers

    [0-9]+      {
                printf( "found an integer, = %d\n",
                        atoi( yytext ) );

    "."         printf( "found a dot\n" );

Here is a scanner which recognizes (and discards) C comments while maintaining a count of the current input line.

    %x comment
            int line_num = 1;

    "/*"         BEGIN(comment);

    <comment>[^*\n]*        /* eat anything that's not a '*' */
    <comment>"*"+[^*/\n]*   /* eat up '*'s not followed by '/'s */
    <comment>\n             ++line_num;
    <comment>"*"+"/"        BEGIN(INITIAL);

This scanner goes to a bit of trouble to match as much text as possible with each rule. In general, when attempting to write a high-speed scanner try to match as much possible in each rule, as it’s a big win.

Note that start-conditions names are really integer values and can be stored as such. Thus, the above could be extended in the following fashion:

    %x comment foo
            int line_num = 1;
            int comment_caller;

    "/*"         {
                 comment_caller = INITIAL;


    <foo>"/*"    {
                 comment_caller = foo;

    <comment>[^*\n]*        /* eat anything that's not a '*' */
    <comment>"*"+[^*/\n]*   /* eat up '*'s not followed by '/'s */
    <comment>\n             ++line_num;
    <comment>"*"+"/"        BEGIN(comment_caller);

Furthermore, you can access the current start condition using the integer-valued YY_START macro. For example, the above assignments to comment_caller could instead be written

    comment_caller = YY_START;

Flex provides YYSTATE as an alias for YY_START (since that is what’s used by AT&T lex).

For historical reasons, start conditions do not have their own name-space within the generated scanner. The start condition names are unmodified in the generated scanner and generated header. See option-header. See option-prefix.

Finally, here’s an example of how to match C-style quoted strings using exclusive start conditions, including expanded escape sequences (but not including checking for a string that’s too long):

    %x str

            char string_buf[MAX_STR_CONST];
            char *string_buf_ptr;

    \"      string_buf_ptr = string_buf; BEGIN(str);

    <str>\"        { /* saw closing quote - all done */
            *string_buf_ptr = '\0';
            /* return string constant token type and
             * value to parser

    <str>\n        {
            /* error - unterminated string constant */
            /* generate error message */

    <str>\\[0-7]{1,3} {
            /* octal escape sequence */
            int result;

            (void) sscanf( yytext + 1, "%o", &result );

            if ( result > 0xff )
                    /* error, constant is out-of-bounds */

            *string_buf_ptr++ = result;

    <str>\\[0-9]+ {
            /* generate error - bad escape sequence; something
             * like '\48' or '\0777777'

    <str>\\n  *string_buf_ptr++ = '\n';
    <str>\\t  *string_buf_ptr++ = '\t';
    <str>\\r  *string_buf_ptr++ = '\r';
    <str>\\b  *string_buf_ptr++ = '\b';
    <str>\\f  *string_buf_ptr++ = '\f';

    <str>\\(.|\n)  *string_buf_ptr++ = yytext[1];

    <str>[^\\\n\"]+        {
            char *yptr = yytext;

            while ( *yptr )
                    *string_buf_ptr++ = *yptr++;

Often, such as in some of the examples above, you wind up writing a whole bunch of rules all preceded by the same start condition(s). Flex makes this a little easier and cleaner by introducing a notion of start condition scope. A start condition scope is begun with:


where SCs is a list of one or more start conditions. Inside the start condition scope, every rule automatically has the prefix SCs> applied to it, until a ‘}’ which matches the initial ‘{’. So, for example,

        "\\n"   return '\n';
        "\\r"   return '\r';
        "\\f"   return '\f';
        "\\0"   return '\0';

is equivalent to:

    <ESC>"\\n"  return '\n';
    <ESC>"\\r"  return '\r';
    <ESC>"\\f"  return '\f';
    <ESC>"\\0"  return '\0';

Start condition scopes may be nested.

The following routines are available for manipulating stacks of start conditions:

Function: void yy_push_state ( int new_state )

pushes the current start condition onto the top of the start condition stack and switches to new_state as though you had used BEGIN new_state (recall that start condition names are also integers).

Function: void yy_pop_state ()

pops the top of the stack and switches to it via BEGIN.

Function: int yy_top_state ()

returns the top of the stack without altering the stack’s contents.

The start condition stack grows dynamically and so has no built-in size limitation. If memory is exhausted, program execution aborts.

To use start condition stacks, your scanner must include a %option stack directive (see section Scanner Options).

[ << ] [ < ] [ Up ] [ > ] [ >> ]         [Top] [Contents] [Index] [ ? ]

This document was generated on August 12, 2012 using texi2html 5.0.

© 2000-2017
Individual documents may contain additional copyright information.